🛒 Best Price Today on Amazon
Prime members get fast, free shipping on everything above, plus member-only deals. New members get a 30-day free trial — cancel anytime.
A solar panel ground mount is a freestanding frame that holds panels on open ground instead of on a roof. It suits cabins, farms, and workshops, and any property where the roof faces the wrong way, is shaded, or cannot carry the extra load. Ground mounts also make cleaning and seasonal tilt changes far easier than climbing onto a roof. This roundup covers five distinct ground-mount systems: a compact adjustable bracket kit, a large galvanized rack for bigger arrays, a complete kit that bundles panels with its mount, and two dual-axis trackers that follow the sun. Roof mounting kits and tilt mounts made for RVs are not included here, since those are covered in separate roundups on this site.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- How to Choose a Solar Panel Ground Mount
- 1. CMYYANGLIN Solar Panel Mounting Brackets Kit System
- 2. ECO-WORTHY Large-Scale Solar Panel Ground Mount
- 3. ECO-WORTHY 780W Solar Panel Kit with Upgraded Ground Mount
- 4. ECO-WORTHY Dual Axis Solar Tracker Set, Expanded Version
- 5. ECO-WORTHY Dual Axis Solar Tracker 1.0, Tracker Only
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
How to Choose a Solar Panel Ground Mount
Start with panel count and panel size. Measure the length, width, and frame thickness of the panels you own or plan to buy, and compare those numbers with the mount’s stated limits before ordering, because clamps are sized for a narrow range and a thin frame can sit loosely in a clamp made for thicker modules. Tilt range is the second decision: a range of 30 to 60 degrees covers most latitudes in the continental United States, and preset holes make seasonal changes quick and repeatable. Materials decide how long the mount survives outside. Aluminum alloy resists rust and stays light enough for one person to carry, while galvanized steel is heavier and stronger for large arrays. Anchoring matters most of all. A ground mount is a sail in high wind, so it needs ballast, ground screws, or concrete footings, and that ballast material is rarely included in the box. Finally, think about expansion: a modular rack that accepts extra rails or a second kit lets an array grow without replacing the whole frame.
1. CMYYANGLIN Solar Panel Mounting Brackets Kit System
The CMYYANGLIN kit, ASIN B0CRV4DTNG, is the Budget pick in this roundup and the most compact ground-mount system of the five. It is an aluminum alloy bracket kit that holds one to four panels on a freestanding frame, with an adjustable tilt range of 30 to 45 degrees. That range suits buyers who want a simple seasonal adjustment without the complexity of a large rack, and the light aluminum construction makes the kit easy to move around a yard before final anchoring.
The kit is built around ballasted tilt triangle brackets, with three triangle brackets in the box, plus rails, clamps, and fasteners. The rails connect to a maximum length of 3565 millimeters for vertical panel layouts, which gives some flexibility in how panels are arranged on the frame. The model is listed as Ground001, with the same code as the part number, and the listing first appeared on January 9, 2024. The package measures 43.5 by 9.5 by 7 inches, so it ships as a fairly compact box for a mount that can hold up to four panels.
This kit fits small off-grid builds best: a cabin array, a shed system, a workshop setup, or a first array where the buyer wants to start with one or two panels and add more later. The aluminum alloy resists rust, which matters for a frame that will sit outside through rain and snow, and the 30 to 45 degree tilt range covers the angles most buyers in temperate latitudes will use. Its light, modular build also suits temporary installs where the array may move, for example while a property is being developed and the final panel location is not yet settled.
There are several points to check before ordering. A crawl of the listing about 326 days ago showed the message “No featured offers available”, so availability should be confirmed before relying on this kit for a build. Review-site notes report that the clamps can struggle with panels under 25 millimeters in frame thickness, so measure panel frames first if the panels are slim. Some owners have reported missing nuts in the box, which is worth checking at unboxing so a hardware-store run can happen before installation day. Assembly can also be time-consuming, particularly for a first-time builder, so allow a full afternoon rather than an hour. One more discrepancy: the listing describes the kit as holding one to four panels, while one review roundup describes it as holding one to three panels. The listing figure is the one to trust, but buyers planning a four-panel layout should confirm the rail and clamp count in the box against the listing before starting the build.
Specs
- Brand: CMYYANGLIN
- Model: Ground001
- Part number: Ground001
- ASIN: B0CRV4DTNG
- Material: Aluminum alloy
- Tilt range: 30 to 45 degrees
- Panel capacity: 1 to 4 panels
- Tilt triangle brackets: 3 pieces, ballasted
- Maximum rail connection: 3565 mm for vertical layouts
- Package dimensions: 43.5 x 9.5 x 7 inches
- First available: January 9, 2024
- Value group: Budget
2. ECO-WORTHY Large-Scale Solar Panel Ground Mount
The ECO-WORTHY large-scale ground mount, ASIN B0DYJZY6R7, is a Mid-range pick built for buyers who need a bigger array on the ground. Where the CMYYANGLIN kit tops out at four panels, this galvanized steel rack is sized for five 400-watt panels, six 300-watt panels, or eight 200-watt panels, which puts it in a different class for off-grid homes, small farms, and workshops that need real output. The frame measures 236 inches long by 39 inches wide, and it can be expanded side by side with additional units as the array grows.
The tilt range runs from 30 to 60 degrees with seven preset angles, which gives more seasonal adjustment than the 30 to 45 degree range of the compact bracket kit. Seven presets make it easy to return to a known angle each season without measuring, and the preset holes lock the frame firmly once set. The load rating is 330 pounds, and the kit includes upgraded middle support rods that distribute panel weight across the rails and reduce sag in the middle of a long span. Sag matters on a rack this long, because a rail that bows under load can stress panel frames and loosen clamps over time, so the extra support rods are a meaningful part of the design.
Galvanized steel is the right material for a rack of this size. It is heavier than aluminum, which is a disadvantage during assembly, but it resists corrosion and holds its shape under the weight of eight panels plus wind load. A large ground mount is a permanent or semi-permanent structure, and it should not need replacement after a few seasons outside. Assembly will take longer than the compact kit simply because there is more frame to build, and two people will make the job easier, particularly when lifting panels onto rails that sit several feet off the ground.
One honest caveat applies to this pick. The ASIN B0DYJZY6R7 was confirmed from the product page address only. No Product information excerpt was available to read for this listing, and no price-history record was found to cross-check it, so the code should be confirmed before ordering. Apart from that sourcing note, the listing is straightforward: a large, adjustable, galvanized steel ground rack for buyers who have outgrown a small bracket kit.
Specs
- Brand: ECO-WORTHY
- ASIN: B0DYJZY6R7
- Material: Galvanized steel
- Tilt range: 30 to 60 degrees, seven preset angles
- Panel capacity: 5 x 400W, 6 x 300W, or 8 x 200W panels
- Dimensions: 236 inches long x 39 inches wide
- Load rating: 330 lb
- Support: Upgraded middle support rods
- Expansion: Expandable side by side with additional units
- Value group: Mid-range
3. ECO-WORTHY 780W Solar Panel Kit with Upgraded Ground Mount
The ECO-WORTHY 780W kit, ASIN B0CCJKKFH8, is a Mid-range pick that takes a different approach from the mount-only systems above: it bundles the panels and the mount in one box. The kit includes four 195-watt monocrystalline panels and an upgraded adjustable ground mount bracket, so a buyer who owns no panels yet can order one item and have everything needed for the array itself. The model is listed as US-L02M195-SPB-1, and the kit is rated at about 3.12 kilowatt-hours per day under four hours of full sun, which is a useful planning figure for sizing batteries and loads.
The mount in this kit is galvanized steel with an anti-rust coating, and it adjusts from 30 to 60 degrees, matching the tilt range of the large-scale rack above. The panels use tempered glass rated IP67 and junction boxes rated IP65, which are the weatherproofing figures that matter for panels left outside year-round. A one-year free replacement term is listed for the kit, and it covers the whole bundle rather than the mount alone.
Buying panels and mount together has clear advantages for a first-time builder. The panels are guaranteed to fit the mount, the clamps match the panel frames, and there is no separate compatibility check to get wrong. It also simplifies delivery, since one shipment covers the array. The trade-off is flexibility: a buyer who already owns panels, or who wants a specific panel brand, will pay for panels they do not need. The 780-watt total suits a cabin, a shed, a small workshop, or a backup array, and it pairs naturally with a modest battery bank and inverter rather than a whole-house system.
The sourcing caveat for this pick is that the ASIN B0CCJKKFH8 was confirmed from a manuals.plus ASIN page for the kit, not from an explicit amazon.com Product information excerpt. The model code US-L02M195-SPB-1 matches the kit, and the manual page describes the same four-panel bundle with the upgraded ground mount, but the code should still be confirmed before ordering. Buyers should also note that this is a complete kit, so the value comparison with mount-only picks is not direct: the kit price covers four panels as well as the rack, while the mount-only systems assume panels are bought separately.
Specs
- Brand: ECO-WORTHY
- Model: US-L02M195-SPB-1
- ASIN: B0CCJKKFH8
- Kit contents: 4 x 195W monocrystalline panels plus upgraded ground mount bracket
- Total output: 780W, about 3.12 kWh per day under 4 hours of full sun
- Mount material: Galvanized steel with anti-rust coating
- Tilt range: 30 to 60 degrees
- Panel glass: Tempered glass, IP67
- Junction box: IP65
- Replacement term: 1-year free replacement
- Value group: Mid-range
4. ECO-WORTHY Dual Axis Solar Tracker Set, Expanded Version
The ECO-WORTHY dual axis solar tracker set, ASIN B0DJLNBP6Q, is the Premium pick for buyers who want the mount itself to follow the sun. A dual-axis tracker moves the panels through the day and across the seasons, keeping them pointed at the sun far longer than a fixed or manually adjusted frame. That makes it the highest-output option in this roundup for a given set of panels, and it suits buyers with limited ground space who need maximum energy from a small footprint, or off-grid homes where every extra watt of solar matters.
This is the expanded version of the tracker, and the set name in the listing is “Dual Axis Solar Tracker Set (Tracker Controller + Panels)”, which means the box includes the tracker, its controller, and panels. The model is listed as US-L03TGSF12-SCB1-1, and the set measures 110 by 110 by 64 inches once assembled. The mounting type is listed as Ground Mount, and the listing shows the set as shipped from and sold by ECO-WORTHY US. The ASIN B0DJLNBP6Q was confirmed from an explicit amazon.com Product information excerpt.
Because the set includes panels, it is best compared with the 780W kit above rather than with the mount-only picks. The difference is the tracking: where the 780W kit holds panels at a fixed tilt until the owner adjusts them, this tracker adjusts itself through the day. That convenience comes with more moving parts, more assembly, and a larger footprint, since a tracker that swings through the day needs clear space around it and a firm anchor. It also needs a flat, open site with no shading through the day.
A look-alike warning applies here. ECO-WORTHY sells an older tracker-only version of this product under a different code, B00JYAIS9W, with the model TGSF12-SCB-1 and the name “Dual-Axis Tracker 1.0”. That older version is pick number five below, and the two listings are easy to confuse: same brand, same dual-axis concept, similar names. The expanded set in this section includes panels and carries the model US-L03TGSF12-SCB1-1 with dimensions of 110 by 110 by 64 inches, while the older version is tracker-only with dimensions of 118.1 by 118.1 by 66.1 inches. Check the model code and the set contents before ordering, and do not assume the two listings are interchangeable.
Specs
- Brand: ECO-WORTHY
- Model: US-L03TGSF12-SCB1-1
- ASIN: B0DJLNBP6Q
- Set name: Dual Axis Solar Tracker Set (Tracker Controller + Panels)
- Mounting type: Ground Mount
- Dimensions: 110 x 110 x 64 inches
- UPC: 810127136069
- Ships from: ECO-WORTHY US
- Sold by: ECO-WORTHY US
- Value group: Premium
5. ECO-WORTHY Dual Axis Solar Tracker 1.0, Tracker Only
The ECO-WORTHY dual axis solar tracker 1.0, ASIN B00JYAIS9W, is the second Premium pick and the tracker-only counterpart to the expanded set above. It is the older generation of the same tracker line, listed under the model TGSF12-SCB-1 with the name “Dual-Axis Tracker 1.0”, and it first appeared on April 26, 2014. It measures 118.1 by 118.1 by 66.1 inches, which makes it slightly larger in footprint than the expanded set, and the manufacturer field states that it is not discontinued. The ASIN B00JYAIS9W was confirmed from an explicit amazon.com Product information excerpt.
The key difference from pick four is that this listing is tracker-only: no panels are included. That makes it the right choice for a buyer who already owns panels and wants to add dual-axis tracking without buying new modules. It also suits a buyer who wants a specific panel brand or wattage that the bundled set does not offer, since any compatible panels can be mounted on the tracker frame. The dual-axis movement follows the sun through the day and across the seasons, so the energy advantage over a fixed mount applies here too, provided the site is open and unshaded.
There are two honest caveats with this pick, and both should be checked before ordering. First, a crawl of the listing about 327 days ago showed the message “No featured offers available”, which means the tracker may have been out of stock at that time. Availability should be confirmed, because a tracker-only listing that cannot be ordered does not help a build. Second, this is the older generation of the same product line as pick four, and the two listings are close enough to confuse. The tracker-only version carries the model TGSF12-SCB-1 and the dimensions 118.1 by 118.1 by 66.1 inches, while the expanded set carries the model US-L03TGSF12-SCB1-1, includes panels, and measures 110 by 110 by 64 inches. Check both codes and both model numbers, and confirm whether panels are included, before placing an order.
For the right buyer, the tracker-only version is a useful option. It separates the tracking hardware from the panels, which keeps the choice of modules open and avoids paying for panels that are not needed. It is best suited to an owner who already has panels in hand, has a clear and level site, and is prepared for a larger assembly job than a fixed rack requires. Like any tracker, it needs space to swing and a solid anchor.
Specs
- Brand: ECO-WORTHY
- Model: TGSF12-SCB-1
- ASIN: B00JYAIS9W
- Product name: Dual-Axis Tracker 1.0
- Mounting type: Ground Mount
- Dimensions: 118.1 x 118.1 x 66.1 inches
- First available: April 26, 2014
- Is Discontinued By Manufacturer: No
- Panels included: No, tracker only
- Value group: Premium
Frequently Asked Questions
Do ground mounts need concrete footings?
Most ground mounts need some form of anchoring, and the right method depends on the kit. Some kits use expansion bolts into a concrete pad, some expect concrete blocks as ballast, and some need legs buried or staked into the ground. A freestanding frame with no anchoring is a wind risk, so read the installation notes before buying and budget for ballast material, which is rarely included in the box.
What tilt angle works best for a ground mount?
A tilt near the site latitude is a good starting point for year-round output, with a steeper angle in winter and a flatter angle in summer. Adjustable mounts with a range of 30 to 60 degrees cover most latitudes in the continental United States. Preset holes make seasonal changes quick and repeatable, and the frame should lock firmly at each setting.
Can ground mounts handle high wind and snow?
A well-anchored ground mount handles wind and snow when it is installed as instructed, with the right ballast and all bolts tightened. Galvanized steel racks and aluminum bracket kits both survive outdoor exposure, but the anchoring matters more than the frame material. Check the load rating in the listing, and confirm that the ballast or footings suit local conditions before the first storm season.
Should I buy a mount-only kit or a kit that includes panels?
A mount-only kit suits buyers who already own panels or want a specific panel brand, because it avoids paying for modules that are not needed. A bundled kit suits first-time builders, because the panels are guaranteed to fit the mount and the clamps match the frames. Compare the two on total system cost rather than on the mount alone, and confirm panel dimensions and frame thickness against the mount limits either way.
Conclusion
A ground mount is the practical choice when the roof cannot carry panels or faces the wrong way, and the five systems above cover the realistic range of that choice. The CMYYANGLIN bracket kit suits small arrays and tight budgets, the ECO-WORTHY large-scale rack suits bigger permanent arrays, the 780W kit suits first-time builders who need panels and racking together, and the two dual-axis trackers suit buyers who want maximum output from a small footprint. Before ordering, measure panel size and frame thickness, confirm the tilt range suits the site latitude, and plan the anchoring method. Check availability on any listing that has shown a “No featured offers available” message, and confirm each ASIN and model code, particularly where two listings from the same brand look alike.
Write Your Review
No reviews yet. Be the first to share your experience!