⏱ 6 min read  ·  ✅ Updated Nov 2026

🛒 Best Price Today on Amazon

Prime members get fast, free shipping on everything above, plus member-only deals. New members get a 30-day free trial — cancel anytime.

Start 30-Day Prime Free Trial →See Today’s Amazon Deals

A cracked or stiff fuel line is one of the small failures that can keep a portable generator or small engine out of service right when it is needed. Replacement hose is a basic maintenance part, but the size, material, and fitting style have to match the machine in front of you. A hose that is close in size is not the same as a hose that fits the nipples, routing, and fuel system the maker designed.

The dojobkinb 3/8 Inch (10mm) ID Fuel Line Hose 10FT is sold as an NBR rubber push lock hose positioned for high pressure use. This review covers only what the product name states, flags the key ratings that are not stated in that name, and helps you decide whether this 10FT length in this size belongs on your parts shelf or whether a different hose type is the better match for your machine.

As an Amazon Associate, we earn from qualifying purchases.

Quick Answer

The dojobkinb fuel line hose is a 10FT length of NBR rubber push lock hose with a 3/8 inch, or 10mm, inside diameter, positioned for high pressure fuel line work. It suits generator and small engine owners whose maker manual calls for this inside diameter and push lock style. Confirm the exact pressure rating, temperature range, and fuel compatibility on the listing and in your manual before ordering.

Key Specs

Spec Detail
Brand dojobkinb
Inside diameter 3/8 inch (10mm)
Length 10FT
Material NBR rubber
Fitting style Push lock
Positioning High pressure
Exact pressure rating not stated
Temperature range not stated
Fuel compatibility list not stated
Outside diameter not stated
Included fittings or clamps not stated

Check price on Amazon

Only the first rows come from the product name itself. The rows marked not stated matter just as much, because a fuel line choice should rest on the maker requirements for your specific engine rather than on a general high pressure label. Check those values on the listing and against your manual before you cut any hose.

Who It’s For

This hose is for owners replacing a worn fuel line on a portable generator or another small engine where the manual or the original hose specifies a 3/8 inch inside diameter. The 10FT length gives material for a single longer run or for cutting shorter sections for more than one machine, with offcuts kept as spares. The push lock format also suits owners whose fittings are designed for push lock hose and who prefer that connection style over a plain hose and clamp setup.

It also fits a prepared maintenance shelf. Keeping a known length of the correct size on hand means a brittle line found during a routine check can be replaced during the same session instead of waiting for a parts order while the generator sits unused.

Who Should Skip

Skip this hose if your machine calls for a different inside diameter, such as a smaller small engine line. Forcing a hose that is too loose or too tight onto a fitting is poor practice, and sizing is not a detail to approximate. Skip it also if your fuel system requires a specific rated hose standard that you cannot confirm for this product, if your fittings are not suited to push lock hose, or if you need a short pre-cut line with fittings already installed. Owners who are unsure which hose type their maker requires should resolve that question first, either from the manual or from a qualified small engine technician.

How It Compares With Alternatives

Generic rubber fuel hose sold by the foot at parts counters is the closest alternative. That route lets a counter staff member match the old hose in person, which helps when the original markings are worn away. The trade-off is travel and limited hours, and the material and rating still need the same checking. This dojobkinb length is a buy-ahead option for owners who already know their size.

Pre-cut fuel line kits with clamps or fittings included are another alternative. Kits reduce guesswork about matching hardware, but they fix the length and the included parts may not match every machine. A plain 10FT hose length offers more cutting flexibility, while asking the owner to supply any fittings or clamps the job needs, since included hardware is not stated for this product.

Submersible in-tank fuel hose and low-permeation rated hoses are separate categories built for specific placements and standards. If your manual names a specific category or standard, that requirement governs the choice, and a general push lock hose should not be substituted on assumption. Likewise, clear vinyl tubing sometimes used on small equipment is a different material class and is not an interchangeable stand-in for an NBR rubber fuel line.

Frequently Asked Questions

Will this hose fit my generator?

Fit depends on the inside diameter and fitting style your generator requires. This hose has a 3/8 inch, or 10mm, inside diameter and a push lock design. Compare that with the size stated in your owner manual or printed on the original hose. If the manual lists a different size or a specific hose standard, follow the manual rather than this general guide.

What fuels can this hose carry?

The product name identifies the material as NBR rubber and positions the hose for fuel line use, but a specific fuel compatibility list is not stated in the name. Modern pump fuels vary, including blends with ethanol, so confirm the stated compatibility on the listing and confirm that your engine maker accepts this hose type for the fuel you use before installing it.

Do I still need clamps with a push lock hose?

Push lock hose is designed to work with push lock fittings, but whether clamps are used depends on the fitting, the system pressure, and the maker instructions for your machine. Included fittings or clamps are not stated for this product. Follow the fitting and engine maker guidance for your exact setup, and do not improvise a connection method on a fuel system.

How should a replacement be installed safely?

Work only on a cool engine, in a ventilated area away from ignition sources, and follow the step-by-step procedure in your owner manual. Drain or contain fuel as the manual directs, route the new hose clear of hot and moving parts, and check for leaks as the manual instructs before regular use. If any step is unclear, have a qualified technician do the job instead. No hose choice replaces careful installation.

Final Verdict

The dojobkinb 3/8 Inch (10mm) ID Fuel Line Hose 10FT is a straightforward shelf part: an NBR rubber push lock hose in a useful 10FT length for owners whose generator or small engine calls for exactly this size and style. Its appeal is simplicity and cutting flexibility. Its limits are the details not stated in the product name, especially the exact pressure rating, temperature range, and fuel compatibility list. Check those three items on the listing, match them against your maker manual, and this hose is a sensible buy for the right machine. If any of them cannot be confirmed, choose a hose whose ratings you can verify.

Explore Our Guides & Free Tools