🛒 Best Price Today on Amazon
Prime members get fast, free shipping on everything above, plus member-only deals. New members get a 30-day free trial — cancel anytime.
A generator remote monitor answers one simple question from anywhere: is the generator all right, and how much fuel or power is left. A home standby unit needs a cellular link that keeps working when the house network is down. A propane tank needs a level sensor that reports before the tank runs dry. A portable generator needs an app that shows output and fuel while the unit sits outside. This guide covers those three approaches, plus a panel-level energy monitor and a controller module for custom installations.
The five picks below fall into three clear groups. Two are Generac accessories built around the Mobile Link app, one for the generator itself and one for the propane tank that feeds it. One is a whole-home energy monitor that watches the circuits a generator powers. The last two are a universal controller module and a portable inverter generator with its own Bluetooth app.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- Generac Mobile Link Cellular LTE Industrial 12V Kit
- Generac 7009 LTE Propane Tank Fuel Level Monitor
- Auto Engineering Smartgen HGM4020 Generator Controller
- Emporia Vue 3 Home Energy Monitor With 16 Sensors
- maXpeedingrods MXR4000 Inverter Generator With Bluetooth App Monitor
- Frequently Asked Questions
- Conclusion
Generac Mobile Link Cellular LTE Industrial 12V Kit
The Generac Mobile Link Cellular LTE Industrial 12V Kit is the most direct way to watch a Generac standby generator from a phone. It is a cellular accessory that connects to the generator and reports status through the Mobile Link app, so the owner can check on the unit from anywhere with cell coverage. The kit is aimed at industrial 12 volt installations, and Generac lists matching 24 volt and combination kits under the same Mobile Link family.
Cellular connectivity is the key advantage here. A Wi-Fi based monitor goes quiet the moment the home router loses power, which is exactly when a standby generator matters most. The kit uses LTE bands 2, 4, and 13, and it connects to the generator through an RS-232 serial link. The module measures 6.00 by 3.25 by 1.63 inches. Generac pairs it with the Mobile Link app, where the owner can view generator status, receive alerts, and follow exercise activity without walking out to the unit.
The app has one firm limit that every buyer should understand before ordering. Mobile Link cannot remotely change the generator state between off, manual, and auto, because Generac built that restriction in for safety. The remote exercise feature works only when the generator is already in auto mode, and it needs a compatible controller plus a Premium plan. The app itself is offered in Basic and Premium tiers, so the exact feature set depends on the plan in use.
This kit is also the pick that needs the most care at ordering time. Generac has refreshed its homeowner connectivity line, and the current homeowner accessory is the Connectivity Cellular Accessory, model G0072150, which is a separate product from this industrial kit. The older homeowner accessories, the 4G LTE model G0072080 and the Wi-Fi and Ethernet model G0071700, have been discontinued, and Generac recommends upgrading to the newer accessory. The industrial 12 volt kit covered here is a different branch of the family, aimed at 12 volt industrial setups rather than the standard homeowner installation.
For a Generac standby owner who wants the most independent remote link available, this kit is the strongest option in the group. It does not depend on home Wi-Fi staying up during an outage, and it ties into the same Mobile Link app that Generac owners already use. The trade-off is that it is a premium accessory with a subscription behind some features, and the buyer has to match the kit to the right generator and voltage. For the right installation, though, it is the closest thing to a direct line to the generator.
Specs
| Brand | Generac |
| Model | G0079620 |
| Product | Mobile Link Cellular LTE Industrial 12V Kit |
| Connectivity | 4G LTE cellular, RS-232 serial |
| LTE bands | 2, 4, 13 |
| Dimensions | 6.00 x 3.25 x 1.63 inches |
| Related models | G0079630 (24V kit), G0079640 (12V and 24V kit) |
| App | Mobile Link |
| Remote state change | Not supported |
| ASIN | B0F6VMWDJW |
Generac 7009 LTE Propane Tank Fuel Level Monitor
The Generac 7009 LTE Propane Tank Fuel Level Monitor watches the other half of a standby generator system: the fuel. A generator that starts on schedule is no help if the propane tank runs dry, and this monitor exists to stop that from happening. It reads the tank level and sends the reading to the Mobile Link app over a 4G LTE cellular connection, so the owner can check the level from anywhere and get a warning before the tank gets low.
The monitor works with tanks from 120 gallons to 1000 gallons and more, including underground tanks that a Bluetooth sensor could never reach. It uses a multi-carrier LTE connection with automatic network switching. The unit mounts magnetically on a remote-ready dial, known as an R3D dial, and it is rated for harsh outdoor conditions from minus 40 degrees Fahrenheit to 140 degrees Fahrenheit. The model number is G0070090, and the UPC is 696471091922.
Installation is straightforward when the tank already has a compatible dial. If the tank does not have a remote-ready dial, a replacement gauge is needed before the monitor can work, so buyers should check the dial on their tank first. The monitor also needs an annual subscription to the Mobile Link Gen app for full functionality, and the subscription figure varies between sources, so buyers should confirm the current terms on the product page before ordering. The readings include the level as a percentage and the remaining gallons, along with usage history and low-level alerts.
One point worth flagging is that app features can change with updates. A published owner report describes features being removed from the app after an update, which is a reminder that the monitor is only as good as the app behind it. The core job, reporting the tank level over cellular, is simple and stable, but anyone who depends on a specific app feature, such as usage history graphs, should confirm that the current version of the app still includes it. The monitor itself is a focused device with one job, and it does that job well.
For a propane-powered standby setup, this monitor closes the loop that a generator monitor alone leaves open. The generator monitor reports that the unit is healthy, and the tank monitor reports that the fuel will last. The subscription and the remote-ready dial requirement are the two conditions to accept, and both are easy to check before buying.
Specs
| Brand | Generac |
| Model | G0070090 |
| Product | 7009 LTE Propane Tank Fuel Level Monitor |
| Connectivity | 4G LTE cellular, multi-carrier with automatic switching |
| Tank size | 120 gallons to 1000 gallons and larger |
| Mounting | Magnetic, remote-ready (R3D) dial required |
| Operating temperature | Minus 40 to 140 degrees Fahrenheit |
| Dimensions | 7 x 3 x 2 inches |
| Weight | 1.3 pounds |
| UPC | 696471091922 |
| Subscription | Annual Mobile Link Gen app subscription applies |
| ASIN | B09WZGK4FL |
Auto Engineering Smartgen HGM4020 Generator Controller
The Auto Engineering Smartgen HGM4020 is a different kind of pick from the rest of this guide. It is not a plug-and-play phone accessory. It is a generator controller module that monitors and manages a generator at the panel, and it talks to the outside world through RS485 MODBUS and CANBUS J1939, plus a USB port.
The HGM4020 watches the electrical and mechanical life of the generator. It reads three-phase mains and generator voltage, current, frequency, and power, along with engine temperature, oil pressure, oil level, and speed. It handles automatic mains failure, which means it can start the generator when utility power drops and stop it when power returns, and it comes in AMF and ASM variants for different control setups. It runs on DC power from 8 to 35 volts, measures 135 by 110 by 44 millimeters, and needs a panel cutout of 116 by 90 millimeters. The operating temperature range runs from minus 25 to plus 70 degrees Celsius.
Remote monitoring with this controller depends on what sits on the other end of the connection. The RS485 MODBUS and CANBUS J1939 ports let a building management system, a remote monitoring gateway, or a custom setup read the generator data from a distance. A homeowner who wants to open an app and see a status screen will get more from a Generac accessory or a panel energy monitor. An installer or a facility owner who already runs a monitoring system will find the HGM4020 fits straight into it.
The practical checks before buying are the panel size, the power supply, and the communication setup. The cutout dimensions and the 8 to 35 volt DC supply need to match the installation, and the buyer needs a plan for the MODBUS or CANBUS link, because the controller on its own does not include a phone app or a cellular modem. For the right buyer, this is the most capable and the most open-ended monitor in the group, and for the wrong buyer it is a module without a finished app.
Specs
| Brand | Auto Engineering |
| Model | Smartgen HGM4020 |
| Product | Generator Controller |
| Display | 132 x 64 LCD |
| Power supply | DC 8 to 35 volts |
| Dimensions | 135 x 110 x 44 millimeters |
| Panel cutout | 116 x 90 millimeters |
| Operating temperature | Minus 25 to plus 70 degrees Celsius |
| Communication | RS485 MODBUS, CANBUS J1939, USB |
| Languages | 8 |
| Control modes | AMF and ASM variants |
| UPC | 602838311619 |
| ASIN | B0DS8L93PS |
Emporia Vue 3 Home Energy Monitor With 16 Sensors
The Emporia Vue 3 Home Energy Monitor with 16 sensors takes a different angle on generator monitoring. It does not talk to the generator at all. It installs inside the home electrical panel and watches the circuits that the generator feeds, so the owner can see exactly which circuits are drawing power during an outage and how much each one uses.
The kit includes the Vue 3 energy monitor plus sixteen 50 amp branch sensors and two 200 amp main current transformers. The branch sensors clamp onto individual circuits, which means the owner can track the air conditioner, the furnace, the water heater, the washer and dryer, and the range separately, instead of seeing one total number for the whole house. The monitor connects over 2.4 GHz Wi-Fi or Ethernet, and it reports real-time energy data to the Emporia app on a phone or a computer, or through the web app. The sensors are accurate within 2 percent, the monitor is UL Listed, and it supports solar and net metering for homes with panels.
There are two limits to understand. First, the Vue 3 needs a 2.4 GHz Wi-Fi connection with internet access to report data, so it goes quiet if the home network is down during an outage, unless the network itself is on backup power. It works best alongside a generator monitor rather than instead of one. Second, the data has retention limits. One-second data is available only while the app is open and is kept for three hours, minute data is kept for seven days, and hour data is kept indefinitely.
Installation deserves a plain warning. The Vue 3 installs directly inside the electrical panel, working around live voltage, and the manual itself notes the risk. Anyone unsure should hire a licensed electrician. The sensor count is also worth checking at ordering time, because Emporia sells the same Vue 3 base unit in different kits. The base kit, model EMV3A-2P-WH, is a separate listing with no branch sensors, and an 8-sensor kit sits between the two. The 16-sensor kit covered here is the fullest single-monitor package.
For a standby owner who already has a generator monitor and wants to see what the generator is actually powering, the Vue 3 is the best addition in this guide. It turns a vague total load into a circuit-by-circuit picture, it needs no subscription, and it works with any generator brand because it watches the panel rather than the generator. The Wi-Fi dependence and the panel installation are the costs, and both are manageable with a little planning.
Specs
| Brand | Emporia Corp. |
| Model | EMV3A-2P-16 |
| Product | Vue 3 Home Energy Monitor with 16 circuit sensors |
| Sensors | Sixteen 50 amp branch sensors, two 200 amp main current transformers |
| Connectivity | 2.4 GHz Wi-Fi or Ethernet |
| Accuracy | Within 2 percent |
| Certification | UL Listed |
| Solar support | Solar and net metering |
| Item weight | 5.06 pounds |
| Dimensions | 10 x 5 x 5 inches |
| Warranty | 1 year |
| Date First Available | June 6, 2023 |
| ASIN | B0C79PNK84 |
maXpeedingrods MXR4000 Inverter Generator With Bluetooth App Monitor
The maXpeedingrods MXR4000 is the only pick in this guide that is a generator itself, with remote monitoring built into the unit rather than added on. The MXR4000 is a portable inverter generator with a Bluetooth app data monitor, so the owner can check power output, fuel level, voltage, frequency, running time, and generator status from a phone while the unit runs outside.
The app shows real-time load power, remaining gasoline, single running time, accumulated running time, and generator status, and it can switch the ECO mode on and off. The generator also carries a multifunction digital display that shows the same data at the unit, along with indicator lights for power, low oil, Bluetooth, and carbon monoxide alerts. The output is 4000 peak watts and 3200 running watts of clean power, with total harmonic distortion at or below 3 percent. The unit is CARB compliant, carries EPA certification, and meets the ANSI and PGMA G300-2018 standard. MaXpeedingrods lists a two-year warranty. It is parallel ready for owners who want to link two units.
The honest limit is the word Bluetooth. The app works over a Bluetooth link, so the phone has to be within range of the generator, and the listing notes that the app needs an internet or Wi-Fi connection as well. That is a very different kind of remote from a cellular monitor that works from across the country. For a campsite or a driveway, Bluetooth range is plenty. For checking a generator at a cabin from home, it is not. Buyers should also note that the app on this model is a data monitor only. It cannot start or stop the generator remotely. The dual-fuel MXR4000GT variant does offer Bluetooth remote start, but it is a different listing with its own code, and that listing showed no featured offers available at research time, so it is not a pick here.
The MXR4000 fits the buyer who wants one purchase that covers both power and monitoring. A portable owner does not need a separate cellular accessory or a panel monitor, because the generator itself reports what it is doing. The trade-off is range, and the trade-off is that the monitoring only covers this one generator. For a portable generator that moves between the campsite, the RV, and the driveway, the MXR4000 is the simplest way to keep an eye on it.
Specs
| Brand | maXpeedingrods |
| Model | MXR4000 |
| Product | 4000 Watt Portable Inverter Generator with Bluetooth App Data Monitor |
| Output | 4000 peak watts, 3200 running watts |
| Connectivity | Bluetooth app data monitor |
| App functions | Power output, fuel level, voltage, frequency, running time, generator status, ECO mode |
| Remote start | Not supported on this model |
| Certifications | CARB compliant, EPA certification, ANSI and PGMA G300-2018 |
| Weight | 48.5 pounds |
| Dimensions | 19 x 12 x 17.3 inches |
| Warranty | 2 years |
| ASIN | B0FCLJNFP6 |
Frequently Asked Questions
Do generator remote monitors keep working when the power goes out?
It depends on the connection. A cellular monitor keeps reporting because it uses the cell network on its own, which is why the Generac accessories in this guide are the strongest choice for outage monitoring. A Wi-Fi monitor such as the Emporia Vue 3 goes quiet if the home network loses power, unless the router and modem are on backup power. A Bluetooth monitor such as the MXR4000 app only works while the phone is within range of the generator. Match the connection type to the situation.
Can I start or stop my generator from the monitoring app?
Usually not, and the limits are worth knowing before buying. Generac Mobile Link cannot remotely change the generator state between off, manual, and auto for safety reasons, and the remote exercise feature works only when the generator is already in auto mode with a compatible controller and a Premium plan. The MXR4000 app is a data monitor only and cannot start or stop the generator at all. Kohler OnCue Plus, a separate system for Kohler generators, does allow remote exercise start and stop.
Do these monitors need a subscription?
Some do and some do not. The Generac Mobile Link app is offered in Basic and Premium tiers, and some features sit behind the Premium plan. The Generac 7009 fuel monitor needs an annual subscription to the Mobile Link Gen app for full functionality, and the subscription figure varies between sources, so confirm the current terms on the product page. The Emporia Vue 3, the Smartgen HGM4020, and the maXpeedingrods MXR4000 app carry no subscription in the listing data available.
Will a remote monitor work with my generator brand?
Generac accessories are built for Generac generators, so the Mobile Link kit and the 7009 fuel monitor fit Generac systems and should be matched to the exact model before ordering. The Smartgen HGM4020 is a universal controller module that works with many generator brands, because it reads standard electrical and engine signals rather than a brand-specific app. The Emporia Vue 3 is brand-agnostic in a different way: it watches the home electrical panel, so it works with any generator that feeds that panel. The MXR4000 is a generator itself, so brand matching does not apply.
Conclusion
The right generator remote monitor follows the setup it watches. A Generac standby owner should start with the Mobile Link Cellular LTE Industrial 12V Kit, and add the Generac 7009 fuel monitor so the propane tank gets the same attention as the generator. A homeowner who wants to see what the generator is actually powering should add the Emporia Vue 3 with 16 sensors. A portable owner who wants monitoring without extra hardware should look at the maXpeedingrods MXR4000, where the app is part of the generator. And an installer building a custom or commercial setup should consider the Smartgen HGM4020, which trades a finished phone app for the deepest data and the widest compatibility.
Cellular range, panel detail, fuel level, and portable convenience are different jobs, and the best monitor is the one that matches the job at hand. Check the model fit, the connection type, and any subscription terms before ordering, and the monitor will answer the question from anywhere.
Write Your Review
No reviews yet. Be the first to share your experience!