🛒 Best Price Today on Amazon
Prime members get fast, free shipping on everything above, plus member-only deals. New members get a 30-day free trial — cancel anytime.
A generator that sits all winter with old fuel in the carburetor rarely wakes up happy in spring. Gummed jets, oily side covers and crusted fasteners are the usual picture, and cleaning them over a drain pan with a rag is slow, messy work. A parts washer turns that job into a routine: soak the part, scrub it under a flow of cleaning solution, and let the dirt settle in the tank instead of on your bench.
The five machines below cover the sizes a home garage uses, from a 3.5-gallon benchtop cabinet to a 20-gallon floor model, plus a bucket-top basin and a bioremediating unit that digests oil. One theme runs through every pick: the fluid decision matters more than the hardware. Every unit here is built for water-based detergents, and this guide is blunt about where petroleum solvents do and do not belong.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
Short on time? The BIG RED T10035 is the benchtop pick, the Red Sun 20 Gallon is the floor cabinet for bigger work, and the ARES 70922 turns any 5-gallon bucket into a scrub station. The CRC BenchtopPRO suits shops that want microbes to digest oil and grease, and the BIG RED AXH-PPW5GR is the light tub to carry to the job.
BIG RED T10035 Torin 3.5 Gallon Parts Washer
The T10035 is the classic benchtop cabinet: a steel tub with a hinged lid and an electric pump that pushes solution through a flexible spout at about half a gallon per minute. The basin, 18 by 13.5 by 9 inches, swallows a carburetor, a recoil housing or a handful of oily fasteners.
Torin is clear about fluid: this washer is not built for flammable or combustible solvents such as mineral spirits, so fill it with a water-based degreaser. The lid carries a fusible link that drops it shut if heat ever builds nearby.
Specs
– 3.5-gallon steel tank
– 110V pump, about 0.5 gallon per minute
– Basin 18 x 13.5 x 9 inches
– Hinged lid with fusible link
– Water-based degreaser only
Red Sun 20 Gallon Parts Washer Cabinet
When parts outgrow a benchtop tub, this floor-standing cabinet is the step up. The welded steel tank holds 20 gallons in total and about 12 gallons of working solution, so a generator side cover or a small transmission case soaks fully instead of sitting half out. A shelf holds parts above the fluid line while they drain, and a basket keeps fasteners out of the tank sludge.
The 110V pump moves solution at 2.7 to 3.3 liters per minute, and that flow plus a brush lifts road film and old oil. Red Sun recommends a non-corrosive water-based solution only, and the pump seals will thank you for obeying: petroleum fluid in a pump built for water-based detergent kills washers early.
Specs
– 20-gallon tank, 12-gallon solution capacity
– 110V pump, 2.7 to 3.3 liters per minute
– Removable shelf and parts basket
– Welded steel cabinet
– Item weight 50.7 lb
– Non-corrosive water-based solution only
ARES 70922 Portable Parts Washer
The ARES takes the opposite approach to a cabinet: the basin sits on a standard 5-gallon bucket, and a submersible pump in the bucket feeds a hard bristle brush at one gallon per minute. Scrub the part over the basin and the solution drains back through channels into the bucket, ready for the next part.
There is no tank to store and no stand to trip over; pack the basin and pump into the bucket and the washer lives on a shelf. ARES builds it for water-based, non-corrosive solutions only, and there is no power switch, so the plug is the switch. For occasional carburetor work, it is the simplest setup here.
Specs
– Fits 5-gallon buckets (bucket not included)
– Submersible pump, 1 gallon per minute
– Hard bristle brush with hose
– Basin 13.75 x 13.75 x 5.12 inches
– Item weight 3.85 lb
– Water-based, non-corrosive solutions only
CRC SmartWasher BenchtopPRO Bioremediating Parts Washer
The BenchtopPRO cleans by biology instead of chemistry. It runs on CRC BT5, a water-based solution seeded with naturally occurring microorganisms. The microbes digest oil, grease and carbon deposits and turn them into water and carbon dioxide, so the solution keeps working instead of loading up with grime.
The solution is non-flammable and non-toxic, which removes the two biggest worries of solvent cleaning, and the self-contained benchtop body suits shops with no room for a floor cabinet. The honest trade-off: bioremediation is patient work. Baked-on carbon still wants a soak and a brush, and the microbes need conditions the maker describes.
Specs
– Model 1000872, self-contained benchtop unit
– Microbes digest oil and grease
– Fluid: CRC BT5 water-based solution
– Non-flammable, non-toxic solution
– Molded plastic housing
– Recirculating pump with filter
BIG RED AXH-PPW5GR Torin 5 Gallon Portable Parts Washer
This self-contained plastic tub is the carry-it-anywhere option. Five gallons of capacity, an electric pump and a 3.5-pound body mean it goes to the machine instead of the machine coming to it: set it beside a generator, scrub the air filter housing and fasteners, then shelve it.
Plastic construction never rusts, and it shrugs off the bumps that dent thin steel. The trade-off is durability under heavy daily use; this is a home-shop and field-service tool, not a fleet unit. For small parts, hand tools and hardware, it covers the work with the least setup of any washer here.
Specs
– 5-gallon plastic tub
– Electric recirculating pump
– Dimensions 13.7 x 13.7 x 5 inches
– Item weight 3.5 lb
– Model AXH-PPW5GR
– For small parts and hand tools
How to choose
Choose the fluid before the washer. Water-based detergents suit most home shops: they do not burn, the fumes are mild, and every machine in this guide is built for them. Petroleum solvents cut grease faster, but they demand a washer whose maker approves them, ventilation, no ignition sources nearby, and disposal through a hazardous waste collection, never down a drain.
Match the pump to the fluid, because the pump is sealed for one fluid family. Water-based solution in a solvent pump, or solvent in a water pump, swells or hardens the seals, and the pump dies early. If a listing does not name the fluid type, walk away.
Size the tank to the largest part you clean regularly. A carburetor fits anywhere; a generator frame cover wants the 20-gallon cabinet. Finally, a parts washer earns its keep only with two habits: drain parts over the tank so solution goes back in, and close the lid between jobs so dust stays out and the fluid lasts.
FAQ
Can I run mineral spirits or diesel in these washers?
No. Every washer here is built for water-based fluids, and the makers say so plainly. Petroleum fluid attacks the pump seals in a water-based unit and adds a fire risk the design never planned for. If your work truly needs solvent, buy a washer built and approved for it, keep it away from heaters and sparks, and ventilate well.
How do I get rid of used cleaning solution?
Never pour it down a drain, on the ground or into household trash. Water-based solution that has washed oil and grease is still oily waste: let solids settle, pour the liquid into a sealed, labeled container, and take it to a local household hazardous waste collection. Bioremediating solution follows the BenchtopPRO maker guidance, but the drain rule still applies.
How often does the fluid need changing?
Skim floating oil, top up what evaporates, and change the fill when scrubbing stops cutting grease or the tank floor carries thick sludge. A lid kept closed between jobs stretches that interval. In a bioremediating washer the microbes keep working while they are fed and kept in their comfort range, so changes are rare.
Is a parts washer worth it for generator upkeep alone?
If you service a generator, mower or snow blower a few times a year, yes. Carburetors, side covers, recoil housings and fasteners come clean in minutes with far less mess than a pan and a rag, and clean parts make diagnosis easier. For one small engine only, the bucket-top ARES is the low-commitment way in.
Verdict
For most home garages, the BIG RED T10035 covers the work: honest size, a real pump and water-based running. Busy small workshops want the Red Sun 20 Gallon for soaking room. The ARES 70922 is the pick when floor space is gone, the CRC BenchtopPRO suits shops that want microbes to handle the oil, and the AXH-PPW5GR is the light tub for field work. Pick the fluid first, match the pump to it, and keep the lid closed between jobs.





Write Your Review
No reviews yet. Be the first to share your experience!