⏱ 7 min read  ·  ✅ Updated Nov 2026

🛒 Best Price Today on Amazon

Prime members get fast, free shipping on everything above, plus member-only deals. New members get a 30-day free trial — cancel anytime.

Start 30-Day Prime Free Trial →See Today’s Amazon Deals

A timing light is a strobe that flashes each time the number one spark plug fires. Pointed at the crank pulley or flywheel, it freezes the timing mark next to the pointer, so you can see when the spark arrives and turn the distributor to match the manual. On distributor engines — classic cars, older trucks, plenty of small engines — it remains the only direct way to set base timing and check the advance curve.

Our top pick: Actron CP7527 Inductive Timing Light. Runner-up: Innova 3555 Advance Timing Light.

Know the limits before you buy. The light needs a spark to trigger its pickup and marks you can see. Diesels have no spark at all, so no light here helps there. Most coil-on-plug engines bury each coil on its plug, leaving no exposed wire to clamp and often no marks. What separates the five picks below is readout, advance method, and power source.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

For a simple base-timing check, the Actron CP7527 is enough tool. To read total advance on a classic V8 with no degree scale on the pulley, pick the dial-back Innova 3555, or the digital Innova 3568 for a tach in the same screen. Points ignition work calls for the Innova 5568, the only pick with a dwell readout. For magneto and small engines with no handy battery, the self-powered ESI 130 is the one that works.

Actron CP7527 Inductive Timing Light

The CP7527 is the plain xenon strobe of the group, sold under the Bosch Actron line. Clamp the inductive pickup around the number one plug wire, clip the leads to a 12-volt battery, and pull the trigger. Each spark fires a bright flash that freezes the mark against the timing tab, ready to read off the pulley scale.

No advance dial, no tach — which suits base-timing checks on carbureted cars, older trucks, and small engines with visible marks. Honest limits: in full midday sun the flash washes out on a greasy pulley, so shade the area or work under cover, and total advance means reading a marked pulley at speed — nothing dials in.

Specs
– Flash: xenon tube, trigger operated
– Pickup: inductive clamp
– Power: 12-volt battery clips
– Base timing only; no advance, no tach
– Fits conventional and electronic ignition

Innova 3555 Advance Timing Light

The 3555 adds the feature classic-car owners use most: a direct-reading advance dial on the back, scaled from 0 to 60 degrees. Rev the engine to the speed where full advance should be in, turn the dial until the mark walks back to the pointer, and read total advance off the dial. A pulley with a single TDC mark is all you need.

The slim barrel rotates to aim into tight bays, skip circuitry keeps the strobe honest to 9,990 RPM, and the leads detach, so a damaged pickup swaps instead of scrapping the tool. One caution fits every dial-back light: accuracy depends on a clean knob and scale, and worn dials drift a degree or two — confirm against a degreed pulley when the number matters. The basic 3551, not this model, is the Innova built for distributorless ignition.

Specs
– Advance dial: 0 to 60 degrees
– Skip circuitry to 9,990 RPM
– Detachable leads, spares available
– Fits conventional, electronic, computer-controlled ignition
– Power: 12-volt battery clips

Innova 3568 Digital Timing Light

The 3568 replaces the dial with buttons and a split-screen LCD showing tach and advance at the same time. You set advance digitally from 0 to 90 degrees, hold the engine at a chosen speed while watching RPM, and bring the mark to the pointer. Most factory procedures are written at an exact RPM, so the built-in tach saves a second tool.

The tach spans 249 to 9,990 RPM and the leads detach for storage. What it lacks is dwell, so if you run points and set dwell before timing, the 5568 below is the better buy. Its digital advance delay is consistent and repeatable, which matters when comparing runs.

Specs
– Digital tach: 249 to 9,990 RPM
– Digital advance: 0 to 90 degrees
– Split-screen LCD: tach plus advance
– Detachable leads
– Rotating barrel, hand guard

Innova 5568 Pro Digital Timing Light

The 5568 is the professional pick, with a four-function backlit readout: tachometer, advance, dwell, and system voltage. The dwell meter covers 0 to 180 degrees for 2 to 12 cylinders. On points ignition, worn points change dwell, and changed dwell shifts timing, so dwell gets set first. The voltage readout doubles as a quick charging-system check.

Advance runs 0 to 90 degrees for two- and four-cycle engines, and the light handles distributorless ignition too. The heavy-duty ABS housing wears a molded boot against fan-blade knocks, the leads detach and run about six feet, and a case is included. It is also the biggest, heaviest light here — pure overkill for one base-timing check a year.

Specs
– Tachometer: 249 to 9,990 RPM
– Advance: 0 to 90 degrees, two- and four-cycle
– Dwell: 0 to 180 degrees, 2 to 12 cylinders
– Voltage readout: 10 to 16 volts DC
– Works with DIS, conventional and electronic ignition

ESI 130 Self-Powered Timing Light

Every other light here needs a 12-volt battery within reach of its clips. The ESI 130, from Electronic Specialties, carries its own power — two D-cell batteries — so nothing clips to the vehicle. That suits magneto ignitions, small engines, boats, six-volt and positive-ground classics, and engines with no battery nearby.

It works on two-stroke and four-stroke engines and stays accurate to at least 14,000 RPM, far beyond street-engine speeds. Trade-offs: no advance dial, no tach, a pickup lead of only about four feet, and flash brightness that draws mixed reports in sunlight, so shade the marks when you can. A strobe also cannot time an engine hiding its marks under the blower housing; there you need maker marks, a degree wheel, or a piston stop.

Specs
– Power: two D-cell batteries
– Two-stroke and four-stroke engines
– Accurate to at least 14,000 RPM
– Fits magneto, points, electronic ignition
– Built in the USA by Electronic Specialties

How to choose

Begin with the engine, not the tool. You need spark ignition, a plug wire the clamp can reach, and marks you can see. Diesel, or coil-on-plug with sealed coils and no marks? Skip this category; use a scan tool.

Next, decide how you will read advance. A plain strobe reads the degrees printed on a fully scaled pulley. A dial or digital advance light shifts the flash so a lone TDC mark tells the whole story at speed. If one upgrade fits the budget, make it advance.

Then weigh the tach. Many specs are given at a set RPM, and a built-in tach holds that speed honest while both hands are busy. Small engines make the point well: many generators and mowers hide marks under shrouds or carry none, yet governed speed still needs setting, and a tach light earns its keep there.

Finally, match power and flash to your workspace. Battery-clip lights run brighter but need a battery nearby; self-powered lights trade brightness for freedom on battery-less engines. Xenon output decides whether you can work outdoors at noon — weaker flashes demand shade or a dim bay. Detachable leads are worth having, since the pickup lead is what gets crushed, melted, and dropped.

FAQ

Can a timing light work on a diesel or a modern coil-on-plug engine?
No. Diesels have no spark to trigger the pickup, and coil-on-plug engines offer no exposed wire to clamp and usually no marks.

Why does the timing mark jump around under the strobe?
Worn distributor bushings, a stretched chain, a vacuum hose left connected, or the pickup on the wrong wire. Fix the mechanical slack first; no light freezes a mark that truly moves.

Do I need an advance light if my pulley already has degree marks?
Not for base timing at idle; a plain strobe reads the scale directly. Advance earns its place at higher RPM, where it brings the mark back to one fixed pointer.

Can these lights time a generator or lawn mower engine?
Only when the engine exposes marks, which many small engines hide under the housing. The ESI 130 suits magneto engines best, and a tach light still helps set idle and governed speed where no marks exist.

Verdict

Buy the Actron CP7527 for base timing on engines with marked pulleys. Choose the Innova 3555 for dial-back total advance on classic cars, or the 3568 for button-set advance with a built-in tach. Step up to the 5568 when points dwell and a voltage check belong in the same job. Keep the ESI 130 for magnetos and anything with no battery to clip to — match the light to the ignition in front of you.

Explore Our Guides & Free Tools