🛒 Best Price Today on Amazon
Prime members get fast, free shipping on everything above, plus member-only deals. New members get a 30-day free trial — cancel anytime.
Safety chains are the quiet backup plan on every tow. If a coupler pops off the ball or a latch fails at highway speed, the chains are the only link left between your tow vehicle and the trailer, and they buy you the seconds needed to slow down and pull over in control. Most states require them by law.
Picking the right set is mostly about matching capacity to your loaded trailer weight, choosing hooks that suit your hitch loops, and getting a length that crosses under the tongue with a little slack.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
For most towers, the CURT 80031 is the sweet spot: a 48-inch grade 30 chain with 5,000 lbs of break strength and 7/16-inch S-hooks. Lighter setups suit the CURT 80010 at 2,000 lbs, the short CURT 80040 fits compact tongues, the REESE Towpower 74059 adds quick links and a 72-inch reach, and the CURT 80303 grade 70 chain is the heavy-duty pick at 12,600 lbs.
CURT 80010 48-Inch Trailer Safety Chain
The CURT 80010 is the classic light-duty chain for small utility trailers, jet ski trailers, and little cargo haulers behind cars and crossovers. It is a grade 30 chain with a minimum break force of 2,000 lbs, suiting the lightest weight classes as long as the pair together meets or exceeds the gross trailer weight.
Two 3/8-inch S-hooks come pre-attached, so hookup takes seconds. The clear zinc finish shrugs off road spray and winter grime better than bare steel, and the 48-inch length gives enough slack to cross the chains under the coupler without dragging. This is a single chain, and towing law expects two chains in a crossed pattern, so plan on a pair.
Specs
- Length: 48 inches
- Chain grade: Grade 30 steel
- Break strength: 2,000 lbs minimum
- Hooks: Two 3/8-inch S-hooks, pre-attached
- Finish: Clear zinc
- Quantity: 1 chain
CURT 80040 27-Inch Trailer Safety Chain
Short tongues and compact hitches leave little room for slack, and that is where the CURT 80040 earns its place. At 27 inches it is the shortest chain in this guide, yet it still carries a 5,000 lbs minimum break force, covering many mid-size utility trailers and smaller campers whose couplers sit close to the bumper.
The 7/16-inch S-hooks are stouter than the hooks on lighter chains and seat firmly in standard hitch loops. Because the chain is short, it stays clear of the ground even on low cars, with less loose chain to rattle or snag. Crossing is still the right technique: run each chain to the opposite side of the hitch so the pair forms a cradle under the tongue. If your trailer uses a folding tongue, measure the full reach before ordering, since a 27-inch chain leaves little margin.
Specs
- Length: 27 inches
- Chain grade: Grade 30 steel
- Break strength: 5,000 lbs minimum
- Hooks: Two 7/16-inch S-hooks, pre-attached
- Finish: Clear zinc
- Quantity: 1 chain
CURT 80031 48-Inch Trailer Safety Chain
The CURT 80031 steps up to the most common towing classes. Its 1/4-inch grade 30 links deliver a 5,000 lbs minimum break force, and the 48-inch length works with the receiver hitches on most SUVs and half-ton pickups. For many camper and utility setups, a crossed pair comfortably covers the gross trailer weight.
The 7/16-inch S-hooks are pre-attached and sized for the chain loops on typical Class III receivers, and the zinc plating resists rust through seasons of rain, slush, and boat-ramp duty. Cross the pair once underneath the coupler so a dropped tongue lands in the cradle instead of digging into the road. If you tow one trailer most of the time, this is the chain to standardize on.
Specs
- Length: 48 inches
- Link diameter: 1/4 inch
- Chain grade: Grade 30 steel
- Break strength: 5,000 lbs minimum
- Hooks: Two 7/16-inch S-hooks, pre-attached
- Finish: Clear zinc
REESE Towpower 74059 Towing Safety Chain
REESE Towpower builds the 74059 for towers who want flexibility. The chain runs a full 72 inches, which helps on long tongues and trailers whose chain anchor points sit far back. Its capacity is 5,000 lbs with a 3/8-inch link diameter, putting it in the same working class as the mid-weight CURT chains above.
Instead of fixed hooks, the 74059 ships with two quick links. Threaded quick links close positively, will not shake loose over rough pavement, and make it easy to shorten the effective length by clipping into a mid-chain link. The bright zinc finish holds up well against road salt.
Because the chain is long, watch your slack: crossed under the tongue with a gentle sag is right, while loops hanging near the asphalt wear through links quickly. Many owners keep a 74059 as the spare set in the truck box, since it adapts to borrowed trailers of almost any shape.
Specs
- Length: 72 inches
- Link diameter: 3/8 inch
- Capacity: 5,000 lbs
- Connectors: Two threaded quick links included
- Material: Steel
- Finish: Bright zinc
CURT 80303 35-Inch Trailer Safety Chain with Clevis Snap Hook
Heavy trailers deserve transport-grade hardware, and the CURT 80303 is built to that standard. It is a grade 70 chain with a minimum break force of 12,600 lbs, aimed at equipment trailers, larger campers, and utility hauls where a pair of chains must hold serious weight in an emergency stop.
The business end is a 1/4-inch clevis snap hook with a spring safety latch. Unlike an open S-hook, a latched clevis hook cannot bounce free when the chain goes slack over a bump, and the clevis pin connection is stronger and easier to inspect. The chain measures 35 inches overall with about 32 inches of chain, in the traditional yellow zinc transport finish. One end is a plain chain end meant to be secured to the trailer, so check your tongue for a suitable anchor point.
Specs
- Length: 35 inches overall (about 32 inches of chain)
- Link diameter: 1/4 inch
- Chain grade: Grade 70 transport chain
- Break strength: 12,600 lbs minimum
- Hook: One 1/4-inch clevis snap hook with safety latch
- Finish: Yellow zinc
How to choose
Begin with weight. The rule used by chain makers and towing law alike is that the pair of chains together should meet or exceed the gross weight of the loaded trailer. A 3,500 lb camper on a pair of 2,000 lb chains is under-chained; step up to 5,000 lb chains and tow with margin.
Next, match the chain diameter and grade to the work. Grade 30 chain in 1/4-inch links covers most utility and camper towing. Grade 70 transport chain, like the CURT 80303, adds tensile strength for heavy or frequent hauls. Bigger link diameters, such as 5/16 or 3/8 inch, add strength but also weight on the tongue.
Hooks decide how secure the connection feels. S-hooks are fast and universal, and squeezing the open end partly closed with pliers keeps them seated. Quick links suit owners who swap trailers often. Clevis snap hooks with latches are the most secure choice for rough roads.
Length is the last piece. Most setups fall between 27 and 48 inches. Cross the chains under the tongue so they form an X that cradles the coupler if it drops, leave enough slack for full turns, and keep the chain off the ground.
FAQ
Are safety chains legally required?
In most states, yes. Towing laws in the majority of states require safety chains on ball-hitch trailers, and many specify that the chains be crossed under the tongue. Rules vary by state and trailer weight, so check your local requirements before a long trip.
Should safety chains be crossed?
Yes. Crossing the chains forms a cradle that catches the tongue if the coupler leaves the ball, keeping it off the pavement and giving you a chance to stop under control.
How much slack should the chains have?
Enough to allow full-lock turns without binding, but not so much that the chain drags. A gentle sag in the crossed pair is the target. If a long chain hangs too low, clip a quick link into a mid-chain link or twist the chain a few turns to take up length.
When should I replace a safety chain?
Replace it when links show deep rust, gouges from dragging, stretching, or a bent hook, and after any incident where the chains caught a falling tongue.
Verdict
For a single dependable set, choose the CURT 80031 and cross a pair under the tongue. Light trailers are well covered by the CURT 80010 or the short CURT 80040, the REESE Towpower 74059 adds quick-link convenience and extra reach, and heavy haulers should go straight to the grade 70 CURT 80303. Match the capacity to your loaded trailer and keep the chains crossed and off the ground.





Write Your Review
No reviews yet. Be the first to share your experience!