⏱ 7 min read  ·  ✅ Updated Nov 2026

A trailer jack does one simple job: it lifts the tongue, holds the trailer level while parked, and lets you roll the rig into place by hand. When the jack is weak, rusty or slow, every hookup turns into a wrestling match, and a coupler that will not clear the ball can leave you stuck at the boat ramp.

Our top pick: Fulton F2 Swivel Jack with Foot Plate (1413230134). Runner-up: Fulton XPD15L0101 Dual Wheel Swivel Jack.

The right pick depends on how your trailer is built. A-frame tongues take a jack that mounts through the coupler plate, while straight tongues usually use a swivel jack that swings up out of the way for travel. Crank style, wheel or foot plate, travel height and finish matter too, especially for trailers that live outdoors.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

For most boat and utility trailers, the Fulton XPD15L0101 dual wheel swivel jack is the easiest to live with. A-frame owners should look at The Ultimate Trailer Jack for its tall 28 inch reach, or the Lippert Power Tongue Jack for push-button lifting. The Fulton F2 swivel jack suits soft ground, and the CURT 28570 handles heavy equipment trailers.

Fulton F2 Swivel Jack with Foot Plate (1413230134)

The F2 is Fulton’s premium marine and recreational jack, and it feels a step above basic tube jacks. The mount height adjusts along the tube, so you can set the bracket where your tongue height needs it. A handle hold-up clip keeps the crank secured against the tube while towing, stopping rattle and wear.

Instead of a wheel, this model ends in a heavy duty articulating foot plate on a ball and socket joint, so the plate sits flat on gravel, grass or a sloped ramp while the tube stays vertical. That makes it a smart pick for trailers that park on soft ground, where a small caster wheel would sink or dig in. With a 2,000 lb lift capacity, it covers most mid-size boat and utility trailers, with corrosion resistance built in for marine use.

Specs

  • Lift capacity: 2,000 lb
  • Mount: bolt-on swivel with adjustable mount height
  • Base: articulating foot plate with ball and socket joint
  • Crank: sidewind with handle hold-up clip
  • Item weight: 18 lb
  • Model number: 1413230134

Fulton XPD15L0101 Dual Wheel Swivel Jack

The XPD15L0101 is the classic Fulton swing-away design fitted with two wheels instead of one. Twin 6 inch wheels spread the tongue load, track straighter over concrete seams and gravel, and make it far easier to push a loaded boat trailer sideways into a tight garage bay.

The bolt-thru swivel mount uses heavy-gauge formed steel and bushings that keep deflection low. Pull the pin, swing the jack up parallel to the tongue, and it rides clear of the ground. The sidewind crank gives fine height control when lining the coupler up with the ball. With a 1,500 lb lift capacity and 12 inches of travel, it suits small to mid-size boat and light utility trailers.

Specs

  • Lift capacity: 1,500 lb
  • Travel: 12 in
  • Wheels: dual 6 in wheels
  • Crank: sidewind
  • Mount: bolt-on swivel, swing-away
  • Model number: XPD15L0101

The Ultimate Trailer Jack

This jack takes a different approach to the A-frame problem. Rather than bolting beside the coupler, it drops through the standard A-frame jack hole and uses a quick release pin, so the whole jack can be removed in seconds. The topwind crank drives a fast thread that raises and lowers the tongue with far fewer turns than a typical screw jack.

Reach is the headline: the jack lifts up to 28 inches, which helps tall trucks and high-riding trailers. A removable foot with a broad base keeps the tongue steady on soil or gravel and can swivel to sit flat on uneven spots. Capacity is 2,000 lb of lift with 3,000 lb of support, fitting most A-frame utility, cargo and small travel trailers.

Specs

  • Lift capacity: 2,000 lb
  • Support capacity: 3,000 lb
  • Maximum lifting height: 28 in
  • Crank: topwind, quick-action thread
  • Mount: A-frame through-hole with quick release pin
  • Base: removable swivel foot

CURT 28570 Top Wind Heavy Duty Drop Leg Jack

When the trailer is a heavy equipment hauler, light-duty tongue jacks run out of muscle. The CURT 28570 is a square tube, direct weld jack built for that work, with an 8,000 lb support capacity and a 7,000 lb lift capacity. Welding straight onto the frame gives it a rigid, flex-free feel bolted mounts cannot match.

The drop leg is the feature you will use every day. Pull the pin and the inner leg falls to the ground on its own, taking up most of the gap before you turn the crank at all, saving dozens of turns per hookup. The top wind handle sits on top of the tube with an integrated grip, and the jack gives 15 inches of screw travel. The tube wears CURT’s carbide black powder coat, a tough finish that shrugs off road grit.

Specs

  • Support capacity: 8,000 lb
  • Lift capacity: 7,000 lb
  • Travel: 15 in plus drop leg adjustment
  • Crank: top wind with integrated grip
  • Mount: direct weld, square tube
  • Finish: carbide black powder coat

Lippert Power Tongue Jack (285318)

Cranking a loaded travel trailer up and down gets old fast, and that is the problem this Lippert jack solves. It is an A-frame power tongue jack that runs on 12V DC, lifting up to 3,500 lb at the push of a button. The 18 inch stroke takes it from 10.75 inches retracted to 28.75 inches extended, covering most travel trailer coupler heights.

Four LED lights in the head point down at the coupler, making night hookups far less fiddly, and a 5.4 inch foot pad spreads the load once parked. If the battery ever runs flat, an emergency manual crank override is built in so you are never stuck.

Specs

  • Lift capacity: 3,500 lb
  • Stroke: 18 in; 10.75 in retracted, 28.75 in extended
  • Power: 12V DC, 30 amp draw
  • Mount: A-frame bolt-on
  • Foot pad: 5.4 in
  • Extras: four LED lights, manual crank override

How to choose

Pick the mount first. A-frame tongues need a jack that bolts or drops through the triangular coupler plate. Straight tongues take swivel jacks, which bolt or weld to the side of the tongue and swing up horizontal for travel, giving better ground clearance at ramps.

Crank style comes next. Top wind handles sit on top of the tube and spin fast, but they need clear space above the jack, so check for interference from tailgates, spare tires and tongue boxes. Side wind cranks work in tighter spaces and are common on swivel jacks. Electric jacks remove the effort entirely but need a healthy 12V supply.

Match capacity to tongue weight, not trailer weight. The jack only carries the tongue, usually 10 to 15 percent of the loaded trailer weight, so clear your tongue weight with room to spare. Then pick a wheel or a foot plate: wheels roll best on pavement, while foot plates are steadier on gravel, grass and soil. For boat trailers, finish matters too, since zinc plated and marine-grade finishes resist ramp rust far better than plain paint.

FAQ

How much lift capacity do I actually need?

Work out your loaded tongue weight, then pick a jack with a lift capacity above it. A 3,500 lb boat and trailer might put only 350 lb on the tongue, so a 1,500 lb jack has plenty in reserve. Heavy equipment trailers can pass 1,000 lb of tongue weight, where heavy duty jacks earn their place.

Can I replace a hand crank jack with an electric one?

Yes, if your trailer has an A-frame tongue with the standard hole pattern and a 12V battery on board. The electric jack bolts into the same plate, and most include a manual crank so a flat battery does not leave you stuck.

Should a boat trailer jack have a wheel or a foot plate?

A wheel is better if you move the trailer by hand on concrete or asphalt. A foot plate is better if the trailer parks on gravel, grass or a sloped ramp, because it will not roll or sink.

How do I keep a trailer jack from rusting?

Rinse it with fresh water after every saltwater launch, work the crank a few turns to spread the internal grease, and touch up chipped finish before rust takes hold. A cover helps on trailers stored outdoors.

Verdict

Most buyers should begin with the Fulton XPD15L0101 for its easy rolling dual wheels, or the Fulton F2 foot plate model if the trailer parks on soft ground. A-frame owners get the most lift range from The Ultimate Trailer Jack and the least effort from the Lippert Power Tongue Jack, while heavy rigs belong on the CURT 28570.

Explore Our Guides & Free Tools