⏱ 7 min read  ·  ✅ Updated Nov 2026

A grill that lives outside ages fast. Rain works into burner tubes, sun cracks knobs and side tables, and damp air feeds rust on grates and fireboxes. A well-fitted cover blocks most of that damage, but only when it matches the grill’s footprint, sheds water instead of trapping it, and stays put on windy nights. The five covers below span the main shapes households own: gas grills, kettles, and smokers.

Our top pick: Classic Accessories Veranda Water-Resistant 58 Inch BBQ Grill Cover. Runner-up: Grillman Premium BBQ Grill Cover, 58 Inch.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

For a typical three-burner gas grill, the Classic Accessories Veranda 58-inch cover is the balanced pick, with padded handles, air vents, and click-close straps. The Grillman Premium 58-inch cover suits owners who want a heavier shell with a PVC backing. Kettle owners are best served by the Weber Premium 7150, shaped for 22-inch Weber kettles. Smoker owners should look at the Classic Accessories Hickory Square Smoker Cover. Anyone running a Weber Performer can pick the Kingkong 7152, a fitted cover bundling a brush and tongs.

Classic Accessories Veranda Water-Resistant 58 Inch BBQ Grill Cover

The Veranda is the cover to measure other midsize gas grill covers against. It is cut for grills up to about 58 inches wide, 24 inches deep, and 48 inches tall, taking in most two- and three-burner models with room for the lid handle and shelves. The Gardelle woven polyester has a water-resistant coating, and a splash guard skirt sheds rain before it reaches the seams.

Two details make daily use easier. Padded handles let you lift the cover off with one hand, even when the fabric is cold and stiff. Air vents along the sides reduce condensation under the shell and cut down on ballooning when wind gets under the hem. Click-close straps snap around the legs, and an elastic cord in the hem pulls the skirt snug.

Specs

    • Fit: grills up to 58 x 24 x 48 in
    • Fabric: Gardelle woven polyester, water-resistant
    • Vents: side air vents
    • Fastening: click-close straps, elastic hem cord
    • Handles: padded front and side handles
    • Extras: splash guard skirt

    Grillman Premium BBQ Grill Cover, 58 Inch

    The Grillman Premium takes a heavier approach for grills in open yards with no fence or roof for shelter. Its shell pairs a dense polyester face with a PVC backing, leaning closer to fully waterproof than lighter water-resistant covers. The fabric is treated to slow fading in strong sun.

    Fit follows the same popular footprint, roughly 58 inches long, 24 inches wide, and 48 inches high, draping over most three-burner gas grills and larger charcoal carts. Hook-and-loop straps wrap the legs, and a drawstring hem cinches tight before a storm. The trade-off is stiffness: on cold mornings the shell takes more effort to fold. In exchange you get a cover that shrugs off hail, sleet, and wind-driven grit.

    Specs

      • Fit: grills up to 58 x 24 x 48 in
      • Fabric: heavy-duty polyester, PVC backing
      • Protection: waterproof, UV-treated
      • Fastening: hook-and-loop straps, drawstring hem
      • Seams: reinforced stitching
      • Use case: exposed yards, four-season storage

      Weber Premium Grill Cover 7150 for 22-Inch Kettles

      Brand-fitted covers earn their keep on round grills, where generic rectangles bunch at the dome and leave the legs exposed. The Weber 7150 is shaped for 22-inch Weber kettle grills, including the Original Kettle and Master-Touch lines, and follows the bowl curve down past the ash catcher. The polyester is deliberately breathable, which suits charcoal grills: ash holds moisture, and a breathable shell lets damp air escape instead of condensing on the lid.

      UV inhibitors woven into the material slow fading, and the fabric stays pliable in cold weather rather than cracking like old vinyl. A single fastening strap wraps the legs and keeps the cover seated in gusts. Because it is light, the 7150 goes on and off in seconds. Measure your kettle across the bowl before ordering, since the 18-inch and 26-inch kettles need different sizes.

      Specs

        • Fit: Weber 22 in charcoal kettles
        • Fabric: breathable polyester, UV inhibitors
        • Protection: water-resistant, fade resistant
        • Fastening: single leg strap
        • Weight: lightweight, easy on and off
        • Shape: dome-following cut

        Classic Accessories Hickory Square Smoker Cover, Medium

        Cabinet smokers need a different cut from grills: tall, narrow, and flat on every side, with a vent stack that rectangle grill covers swallow badly. This Hickory cover is built for square smokers up to about 17 inches long, 14 inches wide, and 30 inches high, the footprint of many popular electric and propane cabinet models. The Weather 10 fabric pairs a rugged woven face with a water-repellent finish and a wipe-clean PVC undercoating.

        An air vent panel helps the inside dry out between cooks, protecting the smoker’s thin steel walls from rust. Padded handles make the cover easy to lift straight up off a tall cabinet, and click-close straps hold the base in place. Measure height with the stack included and depth with the door handle, since cabinet smokers vary more in proportion than grills do.

        Specs

          • Fit: square smokers up to 17 x 14 x 30 in
          • Fabric: Weather 10 woven fabric, PVC undercoating
          • Protection: water-repellent, wipe-clean underside
          • Vent: air vent panel
          • Fastening: click-close straps, padded handles
          • Shape: tall cabinet cut

          Kingkong 7152 Grill Cover for Weber Performer Charcoal Grills

          Performer grills complicate cover shopping because the kettle bowl sits inside a cart with a wide work table, so a plain kettle cover rides up on one side. The Kingkong 7152 is patterned for 22-inch Weber Performer charcoal grills and spans bowl and table in one shell. The heavy-duty fabric pairs a polyester face with a PVC lining, giving it a stiffer hand that shrugs off rain and resists cracking in cold snaps.

          Hook-and-loop straps at the base keep the hem down around the cart legs. As a bundle bonus, the package includes a stainless grill brush and tongs. The fitted shape is the main reason to choose it: a cover matching the cart outline leaves fewer loose folds where water can pool and fewer flapping edges to wear through. Confirm your model year before ordering, as Performer table layouts changed across generations.

          Specs

            • Fit: Weber Performer 22 in grills with cart
            • Fabric: heavy-duty polyester, PVC lining
            • Protection: waterproof, UV and crack resistant
            • Fastening: hook-and-loop base straps
            • Bundle: stainless brush and tongs included
            • Shape: wide cut spanning bowl and table

            How to choose

            Begin with measurements, not burner counts. With the lid closed and shelves in their normal position, measure your grill at its widest, deepest, and tallest points, then pick a cover one to two inches larger in width and depth. A cover that is too tight strains seams and lifts in wind; one that is far too large pools rainwater on top.

            Next, weigh fabric honestly. Higher denier polyester resists tears better, while a PVC backing pushes a cover from water-resistant toward waterproof. Breathable fabrics suit covered patios and charcoal grills that trap damp ash. Coated shells suit open yards and smokers kept outside all winter.

            Then check the small hardware. Air vents release the humid air that builds under any cover and stop the shell acting like a sail. Leg straps or buckles hold better than a drawstring alone, and padded handles make a stiff winter cover easier to remove. Finally, fading: dark covers in full sun fade within a few seasons unless the fabric carries UV treatment, so pick a treated fabric or lighter tone for unsheltered spots.

            FAQ

            Should a grill cover be waterproof or water-resistant?
            Waterproof coated covers shed the most rain and suit grills stored in the open. Water-resistant breathable covers are better under a patio roof or for charcoal grills, because they let trapped moisture escape instead of condensing on metal.

            How do I stop mold growing under the cover?
            Choose a cover with air vents, let the grill dry fully before covering it, and lift the cover on dry days so air can circulate.

            Will a 58-inch cover fit my three-burner grill?
            Usually, yes. Most three-burner gas grills measure between 50 and 58 inches across with shelves up. Measure yours first, including the handle, and compare against the listed dimensions.

            How long should a grill cover last?
            A midweight woven cover in a sheltered yard often lasts three to five seasons. Faded fabric still protects; cracked fabric should be replaced.

            Verdict

            Match the cover to the grill shape first and the fabric second. Gas grill owners who want one dependable all-rounder should take the Veranda, while exposed yards call for the heavier Grillman Premium shell. Kettle owners get the cleanest fit from the Weber 7150, Performer owners from the Kingkong 7152, and smoker owners from the Hickory’s vented cut. Measure carefully, insist on vents and leg straps, and any of these five will add years to the grill underneath.

            Explore Our Guides & Free Tools