⏱ 7 min read  ·  ✅ Updated Nov 2026

A bent axle, a worn-out suspension, or a fresh frame build all lead to the same purchase: a complete axle kit. Buying the beam, hubs, springs, hangers, and U-bolts as one matched package guarantees the spring seats, spindle sizes, and bolt patterns all agree with each other.

Our top pick: RV MURTS Trailer Axle Kit 3500 lbs, 61 Inch Hubface. Runner-up: The Trailer Parts Outlet 3.5K Light Duty Single Trailer Axle Kit, 73 Inch Hubface.

This guide compares five axle kits, from compact 3,500 lb single-axle packages to heavy tandem sets for equipment haulers. Two measurements decide whether any of them fit your frame, so measure before you order.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

For a common 48 inch wide utility or cargo trailer, the RV MURTS 3,500 lb kit with a 61 inch hub face is the direct swap. The Trailer Parts Outlet 3.5K kit and the Rockwell American 3,500 lb idler kit both fit wider 60 inch frames with a 73 inch hub face. Builders moving up to tandem running gear should look at the two Rockwell American 5,200 lb tandem kits, one with tires and wheels included and one without.

RV MURTS Trailer Axle Kit 3500 lbs, 61 Inch Hubface

This kit targets the most common small-trailer footprint: a 3,500 lb axle with a 61 inch hub face and a 46 inch spring center, sized for frames about 48 inches wide. The drum hubs come pre-installed with a 5 on 4.5 bolt pattern, so the wheels from your old axle bolt straight on.

Leaf springs, a U-bolt kit, hangers, and shackles are all in the box, which makes this a genuine one-order replacement when the old suspension is as tired as the old axle.

Specs

  • Capacity: 3,500 lb
  • Hub face: 61 inches
  • Spring center: 46 inches
  • Bolt pattern: 5 on 4.5
  • Hubs: pre-installed 5-lug drum hubs
  • Includes: leaf springs, U-bolt kit, hanger and shackle kit

The Trailer Parts Outlet 3.5K Light Duty Single Trailer Axle Kit, 73 Inch Hubface

The Trailer Parts Outlet builds this light duty kit around a 73 inch hub face and a 58 inch spring center, the pairing used on most 60 inch wide utility frames. The axle tube is alloy steel, and the bundle includes the axle, leaf springs, hanger kit, and U-bolt kits, all matched at the factory.

Because the spring seats and hardware are sized for this exact beam, alignment is simpler: hang the springs, set the axle on the seats, and torque the U-bolts in a cross pattern.

Specs

  • Capacity: 3,500 lb
  • Hub face: 73 inches
  • Spring center: 58 inches
  • Bolt pattern: 5 on 4.5
  • Tube material: alloy steel
  • Includes: axle, leaf springs, hanger kit, U-bolt kits

Rockwell American 3,500 lb Idler Trailer Axle Kit, 73 Inch Hub Face

Rockwell American, a Dexter brand, packages this 3,500 lb idler axle as a full running gear set: beam, double eye springs, U-bolts, and a hanger kit. The powder coated finish holds up well on trailers that live outdoors, and the Posi-Lube spindles let you push fresh grease through the bearings with a gun instead of pulling the hubs apart.

With a 73 inch hub face and 58 inch spring center, it drops onto the same 60 inch frames as the kit above, but the greasable spindles suit trailers that see frequent boat ramp dunkings or long highway miles.

Specs

  • Capacity: 3,500 lb
  • Hub face: 73 inches
  • Spring center: 58 inches
  • Bolt pattern: 5 on 4.5
  • Spindles: Posi-Lube greasable
  • Includes: double eye springs, U-bolts, hanger kit

Rockwell American Tandem 5,200 lb Electric Brake Trailer Axle Kit with Tires, 95 Inch Hubface

This is the near-complete running gear for a tandem build: two 5,200 lb electric brake axles, double eye springs, U-bolts and hangers, plus ST225/75R15 radial tires mounted on 6-lug wheels. Combined capacity is 10,400 lb, and the 95 inch hub face with an 80 inch spring center fits wide equipment and car hauler frames.

Having brakes on both axles matters at this weight. The 12 inch electric drums work with any common in-cab controller, and the matched tire and wheel set removes a separate shopping trip.

Specs

  • Capacity: 5,200 lb per axle, 10,400 lb tandem
  • Hub face: 95 inches
  • Spring center: 80 inches
  • Bolt pattern: 6 on 5.5
  • Brakes: 12 inch electric drums, both axles
  • Includes: two axles, springs, U-bolts, hangers, radial tires and wheels

Rockwell American 5,200 lb Tandem Trailer Axle Kit, 95 Inch Hub Face

If you already own good 6-lug wheels and tires, this version of the Rockwell tandem package skips them: two 5,200 lb electric brake axles with springs, U-bolts, and a tandem hanger kit. The equalizer hangers let the two axles share load over bumps, so getting them matched to the springs in one box is worth more than it sounds.

The 95 inch hub face and 80 inch spring center match the tire-equipped kit above, and the axles cross over with Dexter and Al-Ko running gear.

Specs

  • Capacity: 5,200 lb per axle, 10,400 lb tandem
  • Hub face: 95 inches
  • Spring center: 80 inches
  • Bolt pattern: 6 on 5.5
  • Brakes: electric drums, both axles
  • Includes: two axles, springs, U-bolts, tandem hanger kit

How to choose

Measure two numbers on the old axle before anything else. Hub face is the distance from the outer face of one hub, where the wheel studs sit, to the same face on the opposite side. Spring center is the distance from the center of one spring seat to the center of the other. A kit whose hub face is wrong puts the tires into the fenders or leaves them hanging outside the frame, and a wrong spring center means the seats miss your springs entirely.

Decide between a complete kit and a beam-only replacement. If the springs are flattened, the hangers are egged out, or the U-bolts are rusted thin, a complete kit is the honest fix, because worn suspension parts will wear a new axle unevenly. Beam-only makes sense when the suspension is young and only the axle tube is bent.

Match capacity to the trailer, not the load you hope to carry. Kits run from 2,000 lb for light utility frames through 3,500 lb for most cargo work, 5,200 and 6,000 lb for equipment haulers, and 7,000 lb for heavy tandem rigs. The axle, springs, tires, and coupler all need to agree with the frame capacity on the VIN plate.

Choose idler or braked axles by weight and by law. Many states call for brakes once a trailer passes 3,000 lb loaded, and tandem rigs in the 10,000 lb class should have brakes on both axles. Idler kits are simpler and fine for light single-axle trailers.

Finally, note the axle shape. Straight axles are the default. Drop axles lower the deck by bending the tube down at the spindles, which helps loading mowers and cars but reduces ground clearance. Most leaf spring axles also carry built-in camber, a slight upward bow in the tube that flattens under load so the tires stand straight; never weld or heat a cambered tube straight.

FAQ

How do I measure hub face without removing the wheels?
Measure from the outside mounting face of one hub to the same face on the other side, running the tape under the axle tube. Pulling one wheel gives the cleanest reading.

Can I fit a wider axle kit than the one I removed?
Only within tight limits. The hub face must keep the tire sidewalls clear of the frame and fenders, and the spring center must match your hanger spacing. A kit with loose, unwelded spring seats gives a little freedom on spring center, but hub face is fixed by the hubs themselves.

Do these kits include everything for a new build?
The complete kits include the axle, springs, hangers, and U-bolts, and one Rockwell tandem kit adds tires and wheels. You still need a coupler, jack, safety chains, lights, and wiring for a road-ready trailer.

How long does a swap take?
With the trailer on jack stands, a single-axle kit swap is an afternoon job for two people: unbolt the U-bolts, roll the old assembly out, hang the new springs, and set the new axle. Tandem kits take longer because the equalizers must sit level before final torque.

Verdict

For most owners replacing tired running gear, the RV MURTS 61 inch kit and the two 73 inch kits cover the common frame widths in the 3,500 lb class, with the Rockwell idler kit earning its place for greasable spindles and a tougher finish. Builders stepping up to tandem equipment trailers should go straight to the Rockwell 5,200 lb sets, choosing the tire-equipped version for a one-order build or the iron-only version when wheels are already on hand. Measure hub face and spring center twice, and any of these kits will bolt on the way the factory intended.

Explore Our Guides & Free Tools