🛒 Best Price Today on Amazon
Prime members get fast, free shipping on everything above, plus member-only deals. New members get a 30-day free trial — cancel anytime.
Pocket hole joinery hides strong screws inside angled holes, so face frames, cabinet boxes and drawer assemblies pull together tight with no visible fixings on the show side. The jig makes it repeatable: it holds the drill bit at the correct shallow angle and positions the hole for your stock thickness.
This guide covers five jigs in five roles: a benchtop system with a built-in clamp, a portable twin-hole guide, a complete kit, a mini single-hole jig for repairs, and a heavy-duty aluminum jig.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
For most workshops, the Kreg Pocket-Hole Jig 720PRO is the one to own: its built-in clamp adjusts to the stock on its own, and the docking station keeps accessories within reach. For site work, the Kreg Pocket-Hole Jig 320 packs two drill guides into a compact case. The Milescraft 1325 PocketJig200 is the complete kit, with bit, driver and screws included. The Kreg Pocket-Hole Jig 310 is the mini single-hole pick for repairs, and the MulWark 2 In 1 Aluminum Pocket Hole Jig Kit suits anyone wanting an all-metal jig with adjustable hole spacing.
Kreg Pocket-Hole Jig 720PRO
The 720PRO is a benchtop system built around one-motion clamping. Push the handle and the Automaxx clamp closes on the workpiece while the jig adjusts itself to stock thickness, from 1/2 inch to 1-1/2 inches. That removes the two slowest steps in pocket hole work: shimming the jig for each new board and resetting a clamp between holes.
The docking station adds fold-out support wings for long boards, storage for bits and screws, and a dust collection blade for a shop vacuum hose. The drill guides are hardened steel, so the bushing bore stays round and the bit stays on angle far longer than in a plain plastic guide.
Specs
- Model: KPHJ720PRO
- Clamping: built-in Automaxx one-motion clamp
- Stock range: 1/2 in to 1-1/2 in, self-adjusting
- Drill guides: hardened steel, twin holes
- Extras: docking station, dust port, onboard storage
- Included: drill bit, collar, gauge, driver bits, screws
Kreg Pocket-Hole Jig 320
The 320 is the portable twin-hole guide in the Kreg line. Two hardened steel drill guides sit in a compact body, and a removable spacer lets you set the guides close together for narrow rails, spread them for wider stock, or split the jig into two single guides for awkward repairs. Preset thickness stops cover 1/2 inch, 3/4 inch and 1-1/2 inch material.
With no built-in clamp, you hold the jig with a face clamp, and that freedom is the point: the 320 can ride on the edge of an assembled cabinet, sit inside a drawer box, or travel to site in its small case.
Specs
- Model: KPHJ320
- Drill guides: two hardened steel, removable spacer
- Thickness stops: 1/2 in, 3/4 in and 1-1/2 in
- Clamping: separate face clamp (not built in)
- Included: drill bit, collar, gauge, driver bit, screws
- Case: compact storage case included
Milescraft 1325 PocketJig200
The PocketJig200 is sold as a complete kit: jig, step drill bit, stop collar, driver bit, hex wrench and pocket screws, so nothing else needs ordering before the first joint. The twin barrel design drills two holes side by side, suiting frame rails where a pair of screws shares the load.
A spring-loaded sled sets the jig for board thickness, with four settings built in: 1/2 inch, 3/4 inch, 1 inch and 1-1/2 inches. A built-in depth finder on the underside helps you position the stop collar for each setting, and hardened steel bushings keep tolerances tight against the bit, reducing tear-out. A recessed clamp pocket with a magnet holds a standard clamp in place while you work.
Specs
- Model: Milescraft 1325 PocketJig200
- Drill guides: twin barrel, hardened steel bushings
- Thickness settings: 1/2 in, 3/4 in, 1 in, 1-1/2 in
- Body: ABS and glass-filled nylon, scales
- Clamping: recessed clamp pocket with magnet
- Included: drill bit, collar, driver, wrench, screws
Kreg Pocket-Hole Jig 310
The 310 is the mini single-hole jig, small enough to live in a tool belt pouch and to fit where a full jig cannot. A single hardened steel drill guide handles one hole at a time, and preset stops for 1/2 inch, 3/4 inch and 1-1/2 inch stock keep setup simple: slide the stop to the matching mark, set the collar, clamp, and drill.
That format is exactly what repair work calls for. A loose chair rail, a cracked drawer side or a frame needing one more fixing point rarely leaves room for a wide benchtop jig, but the 310 clamps onto the workpiece in place, even inside an assembled cabinet, and adds a clean pocket hole without dismantling anything.
Specs
- Model: KPHJ310
- Drill guides: one hardened steel guide
- Thickness stops: 1/2 in, 3/4 in and 1-1/2 in
- Body: glass-filled nylon, grip texture base
- Weight: under half a pound
- Included: drill bit, collar, gauge, driver bit
MulWark 2 In 1 Aluminum Pocket Hole Jig Kit
The MulWark jig takes the heavy-duty route: body and guides are machined from aluminum alloy rather than moulded plastic, so it shrugs off drops and shop knocks. Two drill guides sit at the standard 15 degree pocket angle, and the spacing between them adjusts, letting you match hole pitch to narrow stiles or wide rails.
The 2 in 1 name comes from the removable pocket screw jig: one guide section detaches and works as a stand-alone single-hole jig for repairs. Hardened steel guide sleeves line the drill holes, so the bit runs true and the aluminum body is protected from wear where wear matters. Thickness changes use removable spacer blocks.
Specs
- Body: aluminum alloy, all-metal construction
- Drill guides: two, 15 degree angle, steel sleeves
- Hole pitch: adjustable spacing
- Design: removable single-hole jig section
- Thickness setup: removable spacer blocks
- Included: bit, collar, driver, wrench, plugs, screws
How to choose
Guide material decides how long a jig stays accurate. Hardened steel bushings shrug off thousands of drill passes, while plain plastic guides wear oval and let the bit wander, so any jig you plan to keep should have steel where the bit runs.
Match the jig to how you work. A benchtop system with a built-in clamp is fastest for batches of identical parts, such as a set of cabinet frames. Portable twin-hole guides suit site work and small shops, and a mini single-hole jig is the repair specialist. Most jigs here cover 1/2 inch to 1-1/2 inch stock.
Two habits matter more than the badge on the jig. First, set the drill bit collar depth every time the thickness setting changes; a collar set for 3/4 inch stock will blow through 1/2 inch plywood. Second, clamp the workpiece firmly so the jig cannot creep as the bit bites, because holes only land square when nothing moves. Finally, keep both screw types on hand: fine-thread for hardwoods such as oak and maple, and coarse-thread for softwoods and sheet goods.
FAQ
Which screws should I use in hardwood and softwood?
Use fine-thread pocket screws in hardwoods such as oak, maple and cherry, because the finer thread is less likely to split dense grain. Use coarse-thread screws in pine, plywood and other soft materials, where the aggressive thread pulls the joint closed and holds well.
Can I add a pocket hole inside an assembled cabinet?
Yes, with a compact jig. A mini single-hole jig or a detachable guide section can be clamped onto a rail or stile in place, adding a fixing without taking the cabinet apart. Keep the drill square to the jig face and work slowly.
How do I set the drill bit depth correctly?
Set the stop collar using the gauge or depth finder that came with the jig, and reset it every time you change the thickness setting. The bit tip should stop just short of breaking through the far face of the board. A test hole in an offcut confirms the setting first.
Do pocket hole joints still need glue?
Glue is optional on many projects, and the screws alone give a strong joint that can be handled right away. For frames that carry load or see daily use, a thin film of wood glue on the mating faces adds long-term strength, and the screws act as built-in clamps while it cures.
Verdict
Pick the Kreg Pocket-Hole Jig 720PRO if you build cabinets and frames at a bench and want clamp, guides and storage in one system. Choose the Kreg Pocket-Hole Jig 320 for portable twin-hole work, the Milescraft 1325 PocketJig200 for a complete kit in one box, the Kreg Pocket-Hole Jig 310 for repairs in tight spaces, and the MulWark 2 In 1 Aluminum Pocket Hole Jig Kit for an all-metal jig with adjustable spacing.





Write Your Review
No reviews yet. Be the first to share your experience!