🛒 Best Price Today on Amazon
Prime members get fast, free shipping on everything above, plus member-only deals. New members get a 30-day free trial — cancel anytime.
- Quick answer
- FVIEXE 8PCS M8 Rubber Isolator Mounts with Double Stud
- PuBaDuoParts 8-Pack 192310GS Anti Vibration Rubber Feet
- Jinlanonly Vibration Isolator Pad, Double Waffle, 18″ x 18″ x 5/16″
- GnDaYoug 4 Pack Heavy Duty Anti Vibration Pads, 4″ x 4″ x 7/8″
- BXI Exercise Equipment Mat Heavy Duty, 4 x 4 x 0.8 Inches, 4 Pcs
- How to Choose
- Who Should Skip
- FAQ
- Final Verdict
A running generator shakes, and that vibration travels through the frame into the slab or floor beneath it, as a droning buzz through the building and a machine that slowly walks across smooth concrete. Two product families tackle it. Anti-vibration mounts and replacement feet attach to the machine itself, bolting between frame and surface so the rubber stays captive in a fixed position. Anti-vibration pads and mats sit loose under the generator, relying on the machine’s weight to compress a rubber layer between frame and floor.
Neither approach is automatically better. Mounts suit a generator that stays in one place and must not creep. Pads suit a portable unit that rolls in and out of storage, because there is nothing to install. This guide compares two mounts-and-feet options with three pad-and-mat options and explains the listed load figures.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
Choose bolted isolator mounts or replacement rubber feet if your generator lives in one spot, has threaded mounting holes, or creeps while running. Choose loose pads or an equipment mat if the generator is portable, gets stored between outages, or you want a no-install fix. Either way, check the listed load figure against your machine’s weight yourself before ordering.
FVIEXE 8PCS M8 Rubber Isolator Mounts with Double Stud
The FVIEXE set is the most mechanical option here: eight isolator mounts, each a natural rubber element with a metal stud on both ends. One stud threads into the frame or a mounting plate; the other anchors to a floor plate or stand, leaving the rubber captive between them. Because they bolt in place, the generator cannot walk off them as it can drift on a loose pad — a plus for semi-permanent installations.
The listing gives the rubber size as approximately 30 x 20mm and part number FVIEXE-M8-8PCS-BK, and names air compressors, generators, and diesel engines as applications. The M8 thread is the key check: your frame, stand, or plate needs matching M8 threaded points, or a way to add them. With no threaded mounting points, these mounts have nothing to attach to — look at the pads below instead.
| Spec | Detail |
|---|---|
| Type | Bolted rubber isolator mount, double stud |
| Quantity | 8 pieces |
| Thread | M8 |
| Material | Natural rubber |
| Rubber size | Approximately 30 x 20mm |
| Part number | FVIEXE-M8-8PCS-BK |
PuBaDuoParts 8-Pack 192310GS Anti Vibration Rubber Feet
When the simple rubber feet on a portable generator harden, crack, or go missing, the machine rocks and buzzes far more than it should. The PuBaDuoParts set directly replaces that style of foot, built around the 192310GS part number used on many air compressors, generators, and pressure washers.
The listing names specific compatibility references — Coleman Powermate 094-0026, Sanborn E106661, and D091007 — so compare your old foot’s part number and dimensions against them before ordering. A foot that almost fits is not a fit: mounting position and foot height both matter for keeping the frame level. The maker also carries a caution worth repeating: ensure proper installation and use within load capacity to prevent accidents. Replacement feet restore the isolation the machine was designed with — the lowest-effort fix when the originals are worn out.
| Spec | Detail |
|---|---|
| Type | Replacement anti-vibration rubber foot |
| Quantity | 8 pack |
| Part number | 192310GS |
| Dimensions | 1.5″L x 1.5″W x 0.75″Th |
| Listed compatibility | Coleman Powermate 094-0026, Sanborn E106661, D091007 |
Jinlanonly Vibration Isolator Pad, Double Waffle, 18″ x 18″ x 5/16″
The Jinlanonly pad is the classic loose-pad approach in a single large sheet: 18 inches square and 5/16 inch thick, made of natural rubber with a double waffle surface. Frame rails or feet rest on the pad, and the waffle texture lets the rubber flex and grip.
The listing states a nominal load of 60 lbs per square inch. Read that figure carefully: it is a per-square-inch rating, not a total weight limit for the whole pad. What matters is the load each contact patch puts onto the rubber. Whether your machine’s weight, spread over its actual contact area, sits within the maker’s figure is a check to run with your own generator’s weight and footprint in hand. This guide will not convert that figure into a total capacity promise, because the listing does not state one. A heavy generator on four small feet concentrates weight on small patches; a thicker point pad or mat may suit it better.
| Spec | Detail |
|---|---|
| Type | Loose vibration isolator pad, double waffle |
| Dimensions | 18″ x 18″ x 5/16″ |
| Material | Natural rubber |
| Nominal load | 60 lbs per square inch (as listed) |
| Listed applications | Generators, pumps, motors, air-conditioning units |
GnDaYoug 4 Pack Heavy Duty Anti Vibration Pads, 4″ x 4″ x 7/8″
Where the Jinlanonly sheet spreads the load out, the GnDaYoug pads concentrate on the four corners. Each pad is 4 inches square and 7/8 inch thick, built as a sandwich: a ribbed rubber layer, an EVA core, and rubber again. The ribbed face grips floor and foot, and the layered build is thicker and more cushioned than a single thin sheet.
Point pads work well on uneven floors, since each corner positions independently, and they pack away in a drawer between uses. The trade-off is placement: a loose pad only works while it stays under the foot, so a creeping generator can wander off a small pad — check alignment after the first run. The listing states no per-pad load figure in the material reviewed here, so treat sizing as dimensional: feet should land fully on the 4-inch pad, not overhang its edges.
| Spec | Detail |
|---|---|
| Type | Loose anti-vibration point pad, ribbed |
| Quantity | 4 pack |
| Dimensions | 4″ x 4″ x 7/8″ each |
| Construction | Rubber-EVA-rubber sandwich with EVA core |
BXI Exercise Equipment Mat Heavy Duty, 4 x 4 x 0.8 Inches, 4 Pcs
The BXI option takes the pad idea to its heaviest form: four individual mats, each 4 x 4 x 0.8 inches, made of rubber with an embedded steel plate. The steel core spreads a concentrated foot load across the mat instead of letting the foot sink into soft rubber, and keeps the mat from deforming under a parked machine. Although named an exercise equipment mat, the listing explicitly names generators among its applications, alongside condensers, compressors, pumps, and diesel engines.
The listing states a max load of 1000+ pounds per mat. That figure is quoted exactly as listed, per mat: read it as the maker’s stated number to compare against the share of your generator’s weight each corner carries, not as a promise about a whole machine. On an uneven floor the corner share is not simply total weight divided by four, so compare using your real numbers.
| Spec | Detail |
|---|---|
| Type | Loose equipment mat with embedded steel plate |
| Quantity | 4 pieces |
| Dimensions | 4 x 4 x 0.8 inches each |
| Material | Rubber with embedded steel plate |
| Max load | 1000+ pounds per mat (as listed) |
| Listed applications | Generators, condensers, compressors, pumps, diesel engines |
How to Choose
Start with how the generator lives. A unit that stays in place with threaded mounting points suits the FVIEXE stud mounts; worn factory feet matching the 192310GS pattern suit the PuBaDuoParts feet; a unit that rolls out of storage for each outage is better served by loose pads or mats.
Next, do the load check yourself, with your generator’s actual weight and footprint. The figures here are quoted exactly as the listings state them — a nominal 60 lbs per square inch for the waffle pad, 1000+ pounds per mat for the BXI mats — and they are not interchangeable units. A per-square-inch rating only helps once you know your contact area; a per-mat rating only helps once you know how the weight splits across corners. Never round a listed figure into a promise, and if the math is marginal, choose the sturdier construction.
Then check fit: thread size and an existing mounting point for mounts; part number, footprint, and height for feet; full pad contact with no overhang for pads. Finally, consider creep — a generator that walks argues for bolted mounts or a large mat, since small loose pads can be left behind.
Who Should Skip
Skip mounts entirely if your generator has no threaded mounting points and you are not willing to add a mounting plate — there is nothing for a stud mount to hold. Skip replacement feet if your machine’s feet are a different pattern and size, since near-enough feet leave a frame unlevel. Skip loose pads if your generator visibly creeps during a run, because it can wander off them. Skip every option here if your real problem is airborne noise rather than floor vibration: isolators and pads will not quiet exhaust or engine noise itself.
FAQ
Do anti-vibration mounts stop a generator from walking across the floor?
Bolted mounts help most, because the machine is physically attached through the rubber element and cannot drift off it. Loose pads rely on grip and weight, so a creeping generator can still move, especially on smooth concrete. If walking is your main complaint, choose mounts.
How do I compare a per-square-inch rating with a per-mat rating?
You cannot convert one into the other without your own numbers. A per-square-inch figure needs your contact area; a per-mat figure needs the weight each corner carries. Work both out from your generator’s weight and footprint, compare against the figures exactly as listed, and treat neither as a total-machine promise.
Can I use exercise equipment mats under a generator?
Only when the listing says so. The BXI mats here explicitly name generators among their applications and add a steel plate for load spreading. A generic foam gym tile has no such listing, and soft foam compresses flat under a heavy frame, removing the isolation.
Should I replace worn rubber feet or add pads instead?
If the factory feet match a replacement pattern, fresh feet restore the original isolation with the least fuss at the designed height. Pads are better when no matching feet exist, when feet are molded into the frame, or when you want removable isolation for storage.
Final Verdict
The mounts vs pads decision comes down to attachment. The FVIEXE double-stud mounts are the pick for a fixed installation with M8 mounting points, and the PuBaDuoParts feet are the straightforward fix when worn 192310GS-pattern feet are the whole problem. On the pads side, the Jinlanonly sheet suits lighter machines with broad frame contact, the GnDaYoug corner pads suit portable units needing a pack-away solution, and the BXI mats are the heavy-duty choice. Whichever side you choose, run the load check with your own generator’s weight against the figures exactly as listed, and confirm the fit before ordering.
Write Your Review
No reviews yet. Be the first to share your experience!