🛒 Best Price Today on Amazon
Prime members get fast, free shipping on everything above, plus member-only deals. New members get a 30-day free trial — cancel anytime.
- Quick answer
- Mr. Heater High Pressure Propane Gas Regulator with POL Fitting (F273719)
- DOZYANT Propane Regulator and Hose, QCC1, 2 Feet
- Camco Horizontal Two Stage Propane Regulator (59323)
- JR Products 07-30395 Automatic Changeover Regulator
- Flame King KT18ACR-2 2-Stage Auto Changeover LP Propane Gas Regulator with Two 18-inch Pigtails
- How to choose
- Who should skip
- FAQ
- Final verdict
Propane regulators look alike on the shelf, but two decisions separate a correct pick from a dangerous one: pressure class and stage count. A single-stage regulator drops full tank pressure to its outlet pressure in one step, so delivery drifts as the tank empties. A two-stage regulator makes the reduction in two steps, holding the outlet far steadier. This guide compares both designs through five tank-side regulators for portable tanks, RVs, and outdoor appliances.
One boundary applies to every pick below: none is a universal replacement part. A portable generator’s own regulator and hose assembly is specified by its maker, and only that assembly should be used on it. Match the regulator class to the appliance exactly as its maker states, and treat anything uncertain as a job for a licensed gas fitter.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
Choose by pressure class first and stage count second. Appliances built for low pressure need an 11 in WC regulator, while high-pressure appliances need a PSI-class regulator, and the two never substitute for each other. Within the right class, two-stage models hold steadier pressure and suit RV and appliance duty, while single-stage models are simpler.
Mr. Heater High Pressure Propane Gas Regulator with POL Fitting (F273719)
The Mr. Heater F273719 is the high-pressure end of the single-stage class, labeled that way on its body: high pressure, not for use with 11 in WC appliances. It is an adjustable regulator with a 0 to 20 PSI outlet range, a soft-nose POL inlet, and a 1/4-inch female pipe thread outlet; the maker guide rates it at 400,000 BTU capacity, lists it as UL Listed, and names outdoor high-pressure appliances such as torches, fish cookers, and smokers.
Delivering pressure in PSI rather than inches of water column, it must never feed a grill, RV appliance, or generator specifying low pressure — and no low-pressure regulator can replace it on a high-pressure cooker.
| Spec | Detail |
|---|---|
| Brand / Model | Mr. Heater F273719 |
| ASIN | B0002YQP76 |
| Class | Single-stage, high-pressure adjustable |
| Outlet pressure | 0-20 PSI adjustable |
| Capacity | 400,000 BTU (maker guide) |
| Inlet / Outlet | POL (soft nose) / 1/4-inch female pipe thread |
DOZYANT Propane Regulator and Hose, QCC1, 2 Feet
The DOZYANT assembly is the low-pressure single-stage pattern most grill owners know: a regulator and a 2-foot rubber hose sold as one unit, with a QCC1 Type 1 tank connector. The listing rates it at 95,000 BTU per hour with an 11-inch W.C. outlet pressure, and states CSA certification and excess-flow protection. Inlet pressure is listed at 25 to 250 PSI.
As a single-stage unit, its outlet pressure wanders as tank pressure falls and burner demand changes — acceptable for a grill, heater, or fire pit table. The captured listing text does not state the outlet fitting size, so confirm it against your appliance inlet before ordering. Longer and braided variants from the same brand are different products.
| Spec | Detail |
|---|---|
| Brand / Model | DOZYANT / not stated |
| ASIN | B01GZPBCPU |
| Class | Single-stage, low-pressure, regulator with hose |
| Outlet pressure | 11 in W.C. |
| Capacity | 95,000 BTU/hour |
| Inlet / Hose | QCC1 / Type 1 connector / 2 ft rubber hose |
| Outlet fitting | Not stated |
Camco Horizontal Two Stage Propane Regulator (59323)
The Camco 59323 is a regulator-only two-stage unit in a horizontal mount, a common RV tank-end layout. The listing states 160,000 BTU per hour capacity, a 1/4-inch female NPT inlet, a 3/8-inch female NPT outlet, and a steady 11-inch W.C. outlet pressure. It fits 20 lb or 30 lb tanks and ships without a pigtail, so a separate pigtail connects it to the tank valve.
Mounting orientation matters on this regulator: the vent must point as the maker specifies for the mounting position, which is why horizontal and vertical versions of this regulator family are separate products that must never be substituted for one another. Buy the orientation your mounting position requires, and order a matching pigtail if yours is aged or damaged.
| Spec | Detail |
|---|---|
| Brand / Model | Camco 59323 |
| ASIN | B0024E6TQY |
| Class | Two-stage, horizontal mount, regulator only |
| Outlet pressure | 11 in W.C. |
| Capacity | 160,000 BTU/hr |
| Inlet / Outlet | 1/4-inch female NPT / 3/8-inch female NPT |
JR Products 07-30395 Automatic Changeover Regulator
The JR Products 07-30395 adds automatic changeover to two-stage regulation. It connects to two cylinders through dual 1/4-inch inverted flare inlets and feeds the appliance line through a 3/8-inch FPT outlet. When the service cylinder empties, it redirects flow to the reserve cylinder without interrupting supply, and the indicator dome changes from green to red to show which cylinder needs filling.
Construction is zinc die cast with molded rubber diaphragms, and the listing states UL approval. The listing does not publish a BTU rating or an outlet-pressure figure for this model, and neither is guessed here — check the maker’s current documentation if those figures decide your purchase. For an RV or cabin running two tanks, the changeover behavior is the reason to choose it.
| Spec | Detail |
|---|---|
| Brand / Model | JR Products 07-30395 |
| ASIN | B00OKNWULK |
| Class | Two-stage, automatic changeover |
| Outlet pressure | Not stated |
| Capacity | Not stated |
| Inlets / Outlet | Dual 1/4-inch inverted flare / 3/8-inch FPT |
| Construction | Zinc die cast, molded rubber diaphragms |
Flame King KT18ACR-2 2-Stage Auto Changeover LP Propane Gas Regulator with Two 18-inch Pigtails
The Flame King KT18ACR-2 is the same two-stage auto-changeover idea sold as a complete kit: the regulator plus two 18-inch pigtails. It switches automatically from the primary cylinder to the reserve when the primary empties, with a colour-change indicator, and lets the empty cylinder be removed for refill without interrupting supply. Inlets are 1/4-inch SAE inverted flare, the outlet is a 3/8-inch NPT female thread, and the outlet pressure is factory set at 11 WC. The listing rates this model at 345,200 BTU and states UL listing.
That capacity figure belongs to this model only — sibling regulators carry different ratings, so never transfer figures between them. Pigtail length is likewise part of this product’s identity: the same family is sold with shorter pigtails and as a regulator alone. Measure your layout first, set both cylinder valves up as the maker directs, and leak-check every connection before first use.
| Spec | Detail |
|---|---|
| Brand / Model | Flame King KT18ACR-2 |
| ASIN | B0C4SCTG55 |
| Class | Two-stage, automatic changeover |
| Outlet pressure | Factory set at 11 WC |
| Capacity | 345,200 BTU |
| Inlets / Outlet | 1/4-inch SAE inverted flare (x2) / 3/8-inch NPT female |
| Included | Two 18-inch pigtails |
How to choose
Start with pressure class, because it is a safety match rather than a preference. Read the appliance nameplate or manual: if it specifies 11 in WC, only a low-pressure regulator belongs on it, and a high-pressure adjustable regulator like the Mr. Heater pick must never be fitted, even turned down. A high-pressure cooker or torch needs the PSI-class regulator its maker specifies. A generator’s own regulator and hose assembly is likewise maker-specified — replace it only with the assembly the generator maker names.
Next, choose the stage count. Single-stage is simpler and adequate for a single grill or cooker. Two-stage holds delivery steady, which suits RV appliances and longer runs. On two-stage RV regulators, confirm the vent orientation — horizontal and vertical models are different products, and the vent must point as the maker specifies.
Then check capacity and fittings. The BTU rating should cover the combined demand of the appliances it feeds, with headroom. Confirm the tank connection (POL on older valves, QCC1 on modern ones), thread types and sizes, and whether pigtails or a hose are included. After any regulator or hose change, leak-check every connection using the method the product maker approves, inspect hoses for damage, and replace a damaged assembly instead of attempting a regulator repair. Gas work follows local codes; if anything is uncertain, a licensed fitter should do or check the work.
Who should skip
Skip every pick here if your appliance or generator maker specifies one exact regulator or hose assembly — that specification wins over any comparison. Skip the high-pressure Mr. Heater pick if your nameplate says 11 in WC, and skip the low-pressure picks for a high-pressure cooker. Skip the changeover models if you run a single tank with no plans to add a reserve cylinder; a plain two-stage or single-stage unit covers that setup. And skip the whole category if you are unsure which pressure class your appliance needs — find the nameplate figure or ask a licensed gas fitter first.
FAQ
What is the practical difference between single-stage and two-stage?
A single-stage regulator makes the full pressure drop in one step, so outlet pressure drifts as tank pressure falls and demand changes. A two-stage regulator splits the drop across two stages, holding the outlet much steadier. Two-stage does not mean suitable for more appliances — it means steadier delivery in the same pressure class.
Can a high-pressure regulator run an 11 in WC appliance if it is adjusted down?
No. High-pressure and low-pressure regulators are different classes, and the Mr. Heater pick here is marked by its own maker as not for use with 11 in WC appliances. Match the regulator class to the class the appliance maker specifies — an adjustable high-pressure unit is never a substitute.
What does an automatic changeover regulator actually do?
On a two-tank setup, it draws from the service cylinder first, then redirects flow to the reserve automatically when it empties, without interrupting supply. An indicator changes colour to show the service cylinder needs filling, and that cylinder can be removed for refill while the reserve keeps feeding the appliances.
What should I check after installing a new regulator?
Leak-check every connection with the method the product maker approves, route hoses away from hot surfaces and open flame, and store tanks upright with valves closed when not in use. If a connection will not seal, or anything is uncertain, stop and have a licensed fitter check the work.
Final verdict
For a single grill or cooker on one tank, a single-stage regulator in the correct pressure class — low-pressure like the DOZYANT assembly, or high-pressure like the Mr. Heater F273719 for appliances that genuinely need it — is the simple choice. For RV and multi-appliance duty, two-stage regulation earns its place: the Camco 59323 for a regulator-only horizontal mount, and the JR Products 07-30395 or Flame King KT18ACR-2 kit when automatic changeover matters. Class first, capacity second, fittings third — and leak-check the result.
Write Your Review
No reviews yet. Be the first to share your experience!