🛒 Best Price Today on Amazon
Prime members get fast, free shipping on everything above, plus member-only deals. New members get a 30-day free trial — cancel anytime.
For most farms, a diesel generator earns its place by starting heavy motor loads reliably and running for long stretches on modest fuel. The right size depends on your well pump, barn ventilation, milking or grain equipment and any house loads you want covered. Below is how to size one, what features matter, and what to get an electrician to handle.
Quick Picks by Need
- Small hobby farm: portable diesel or compact open-frame unit for a well pump, freezer and lighting.
- Livestock barns: mid-size stationary diesel with an automatic transfer switch to keep fans, heaters and water running.
- Grain handling and dryers: large three-phase diesel matched to the biggest motor start.
- Dairy or poultry operations: standby diesel with an oversized fuel tank and automatic start.
- Tractor-driven option: power take-off generator for occasional heavy use where a tractor is already available.
Sizing for Motor-Heavy Loads
Farm loads are dominated by motors, and motors draw several times their running current at startup. Make a list of everything that must run during an outage, noting running watts and starting watts or locked-rotor amps from each nameplate. Add all running loads, then add the largest single starting surge. Stagger starting large motors rather than letting several start at once, and you can often choose a smaller generator.
Single-phase versus three-phase matters. Many irrigation pumps, grain systems and shop machines are three-phase, and they need a generator built to supply that configuration. Confirm voltage and phase with your electrician before you buy.
Why diesel suits this work
Diesel engines deliver strong torque at low speeds, which helps with motor starts, and they are typically built for long duty cycles. Diesel fuel also tends to store more safely and longer than gasoline, and many farms already keep a bulk tank for equipment.
Runtime, Fuel Storage and Maintenance
Estimate runtime from the fuel consumption listed at 50 and 75 percent load, then multiply by the hours of outage you want to survive. Long rural outages after storms can last days, so a bigger tank or a connection to your bulk tank is worth considering.
- Keep fuel clean and treated; water and microbial growth are common problems in stored diesel.
- Change oil, filters and coolant on the schedule in the manual.
- Exercise the generator under load periodically so it is ready when needed.
- Light loads for long periods can cause wet stacking in diesels, so avoid running far below the recommended load for extended times.
Features That Matter
Look for an automatic transfer switch if livestock or refrigeration cannot tolerate a gap in power. Check the enclosure for weather and sound protection, the cold-weather starting aids such as a block heater, and the quality of the control panel. Low-oil and over-temperature shutdowns protect the engine. Remote monitoring is handy if the generator sits far from the house. Noise ratings are worth reading if neighbors or animals are sensitive to sound.
Safety and Installation
- Diesel exhaust contains carbon monoxide and other harmful gases. Never run a generator inside a barn, shed or any enclosed space.
- Keep a safe distance from buildings, ventilation intakes and animals, with exhaust directed away.
- Have a licensed electrician install the transfer switch and wiring. Backfeeding the grid through improper connections can injure utility workers.
- Ground the unit properly and follow local electrical codes.
- Store fuel in approved containers away from ignition sources, and keep a fire extinguisher nearby.
Common Mistakes
- Ignoring motor starting surge and choosing an undersized unit.
- Forgetting phase requirements for three-phase equipment.
- Neglecting fuel quality and filter changes.
- Placing the unit where exhaust can drift into a barn or house.
- Skipping regular test runs under load.
Frequently Asked Questions
How big a diesel generator does a farm need?
It depends on your largest motor and everything running together. Add running watts for all essential loads and the biggest starting surge, then include a margin. An electrician or dealer can verify the figure.
Is diesel better than gas or propane for a farm?
Diesel is often favored for heavy, long-duration loads and easier fuel storage. Gas is more common in small portable units, and propane suits clean-burning standby setups. The best choice depends on load size and the fuel you can store safely.
Do I need an automatic transfer switch?
If animals, milk cooling or incubation depend on constant power, automatic switching is strongly worth considering. A manual switch works where you can respond quickly to an outage.
Can a tractor PTO generator replace a standalone unit?
It can work as a budget option for occasional outages, but it ties up the tractor and is less convenient for automatic or unattended power.
Planning Fuel and Placement
Think about logistics before you buy. Where will the generator sit so exhaust stays clear of barns and the house, while cables stay short enough to limit voltage drop? A concrete pad, a weather enclosure and easy truck access for fuel make life simpler. If you connect to an existing bulk tank, confirm the fuel line, filtration and any codes that apply to on-farm storage.
Consider cold weather too. Diesel can gel in low temperatures, so use winter-blend fuel or additives where needed, and look for block heaters and battery warmers if the unit must start reliably on frozen mornings. Keep batteries charged with a maintainer, since a weak starting battery is among the most common reasons standby units fail.
Write a simple outage checklist for everyone on the farm: how to confirm the generator started, which loads to shed, how often to check oil and fuel, and who to call for service.
Final Thoughts
Treat the generator as part of the farm’s infrastructure. Map your critical loads, respect motor starting surges, confirm phase and voltage, and plan fuel and maintenance before the next storm. Bring in a licensed electrician for installation, and you will have dependable power when it counts.
Write Your Review
No reviews yet. Be the first to share your experience!