⏱ 10 min read  ·  ✅ Updated Nov 2026

🛒 Best Price Today on Amazon

Prime members get fast, free shipping on everything above, plus member-only deals. New members get a 30-day free trial — cancel anytime.

Start 30-Day Prime Free Trial →See Today’s Amazon Deals

If you already own one inverter generator and need more power than it can deliver alone, the fastest answer is a 50-amp parallel kit. These kits link two compatible inverter generators, combine their output, and present it through a heavy-duty 50-amp receptacle, usually a NEMA 14-50R. That single outlet lets a pair of mid-size inverters run a 50-amp RV, feed a transfer switch for home backup, or handle a large air conditioner that neither unit could start alone. The five kits below cover 120-volt kits for RV and transfer-switch duty, and 240-volt kits for split-phase home backup. Each pick is matched to the generator family it was built for, because parallel kits are not universal, and choosing the right voltage and brand pairing matters more than any other spec on the box.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

Quick Picks

  • Best overall 120V kit: Champion 100319 ParaLINK, with a 50-amp RV receptacle, a 30-amp locking outlet, and both 30-amp and 50-amp circuit breakers.
  • Best value 120V kit: WEN GNA50i, which pairs any two WEN inverter generators and adds a transfer-switch-ready 30-amp outlet.
  • Best for 240V home backup: WEN GNA240i, rated for up to 12,000 watts of combined 240-volt output through a single 14-50R receptacle.
  • Best standards-based 240V kit: AIVOLT APV24080, built to the ANSI/PGMA G300-2018 parallel standard for enclosed-frame inverter generators.
  • Best for Generac owners: Generac 7668, the factory cable kit for the iQ3500 and GP3000i, with integrated 2-foot leads and dual breakers.

The Champion 100319 ParaLINK is the kit to shortlist if your inverter generators wear the Champion badge. It is engineered for two Champion inverter generators rated at 2500 watts or higher, and it clips on without tools, so the pair can be linked or separated in minutes at a campsite or in a driveway. The control box carries the two outlets most owners actually use: a standard 120-volt 50-amp RV receptacle (14-50R) and a 120-volt 30-amp locking outlet (L5-30R). That pairing means one kit can feed a 50-amp RV shore cord directly, or step down to a 30-amp locking connection for a transfer switch or a smaller trailer.

Overload protection is built in rather than left to the generators alone. Champion fits both a 30-amp and a 50-amp circuit breaker, one for each receptacle. The housing is compact at 11 by 4.3 by 5.1 inches, which helps when the kit has to live in an RV pass-through compartment. Champion backs the 100319 with a 1-year limited warranty and free lifetime technical support, a mid-range package for owners who want the factory kit rather than a universal cord.

Specs

  • Brand and model: Champion Power Equipment 100319 ParaLINK
  • Compatibility: Two Champion inverter generators, 2500 watts or higher
  • Output voltage: 120V
  • Receptacles: One 120V 50A RV outlet (NEMA 14-50R), one 120V 30A locking outlet (NEMA L5-30R)
  • Circuit breakers: 30-amp and 50-amp
  • Dimensions: 11 x 4.3 x 5.1 inches
  • Installation: Tool-free clip-on connection
  • Warranty: 1-year limited

WEN GNA50i 50-Amp 6000-Watt Parallel Connection Kit

Check price on Amazon

The WEN GNA50i is the budget-friendly route into 50-amp parallel power for the large installed base of WEN inverter generators. It connects any two WEN inverter generators and combines them up to a 6000-watt, 50-amp ceiling at 120 volts, enough headroom to start and run the air conditioner in most travel trailers while still powering a converter, refrigerator, and lights. Like the Champion kit, it gives you two ways out: a NEMA 14-50R 50-amp outlet for RV shore power, and a NEMA L5-30R 30-amp outlet that WEN describes as transfer-switch ready for home backup.

Because the kit is brand-specific, the parallel leads plug into the dedicated parallel ports on WEN inverters and let the two units synchronize directly, with no separate control module. WEN notes that all of its 120-volt parallel-capable inverter generators work with its 120-volt parallel kits, so owners can mix a smaller and a larger WEN unit as long as both are 120-volt parallel-ready models. For shoppers who already own one WEN inverter and want the least complicated path to double output, the GNA50i is the natural pick in the budget tier.

Specs

  • Brand and model: WEN GNA50i
  • Compatibility: Any two WEN inverter generators (120V parallel-capable models)
  • Maximum combined output: 6000 watts
  • Output: 120V, 50 amps
  • Receptacles: One NEMA 14-50R 50A 120V outlet, one NEMA L5-30R 30A 120V outlet (transfer-switch ready)
  • Connection: Plugs into the parallel ports on each generator; no separate control module
  • Color: Black

WEN GNA240i 50-Amp 12000-Watt 240V Parallel Connection Kit

Check price on Amazon

Most parallel kits are 120-volt devices, which limits them to RV duty and single-leg backup loads. The WEN GNA240i exists for the other job: true 240-volt split-phase output. It connects any two 240-volt-parallel-capable WEN inverter generators and delivers up to 12,000 watts at 240 volts through a single NEMA 14-50R receptacle. That is the configuration needed to run 240-volt home loads such as a well pump, an electric water heater, or a central air conditioner through a transfer switch or interlock during an outage, using two portable inverters instead of one large conventional generator.

The kit keeps the wiring tidy with internal cord storage, so the parallel leads stow inside the housing instead of tangling in a storage bin. WEN is explicit that 120-volt and 240-volt parallel systems cannot be mixed: the GNA240i only works with WEN inverters that offer 240-volt parallel operation. Within the premium tier of this roundup, it is the pick for homeowners whose backup plan depends on 240-volt circuits, provided both generators are on WEN’s 240-volt parallel list.

Specs

  • Brand and model: WEN GNA240i
  • Compatibility: Any two 240V-parallel-capable WEN inverter generators
  • Maximum combined output: 12,000 watts
  • Output: 240V, 50 amps
  • Receptacle: One 240V NEMA 14-50R outlet
  • Storage: Internal cord storage
  • UPC: 044459024019

AIVOLT 240V 50-Amp Parallel Kit (APV24080)

Check price on Amazon

The AIVOLT APV24080 takes a different approach from the brand-locked kits above. It is built around the ANSI/PGMA G300-2018 standard parallel link, the industry standard connection used by many enclosed-frame inverter generators, so it is aimed at owners whose 240-volt inverters follow that standard rather than a single brand’s proprietary port layout. The kit provides a 240-volt 50-amp outlet (14-50R) for the main load and a 240-volt 30-amp locking outlet (L6-30R) as the secondary output, which suits a transfer switch connection for home backup.

Protection and weather details are stronger than on many third-party kits. AIVOLT includes both 30-amp and 50-amp circuit breakers, and the receptacles have covers to keep out dust and moisture when the kit is stored or used outdoors. For shoppers with standard-port 240-volt enclosed-frame inverters from brands that do not sell a first-party 50-amp kit, this mid-range option fills the gap without resorting to improvised adapters, which generator manufacturers consistently warn against.

Specs

  • Brand and model: AIVOLT APV24080
  • Compatibility: Enclosed-frame inverter generators with ANSI/PGMA G300-2018 standard parallel ports
  • Output: 240V, 50 amps
  • Receptacles: One 240V 50A outlet (NEMA 14-50R), one 240V 30A locking outlet (NEMA L6-30R)
  • Circuit breakers: 30-amp and 50-amp
  • Extras: Outlet covers included
  • UPC: 664008295877

Generac 7668 120V Parallel Cable Kit

Check price on Amazon

Generac owners with an iQ3500 or GP3000i should look at the factory option first. The Generac 7668 is a 120-volt parallel cable kit designed specifically for those two inverter generator families, linking a pair of them so their combined output can serve larger loads at the campsite, at a tailgate, or as light home backup. The box provides one 30-amp 120-volt receptacle and one 50-amp 120-volt receptacle, so the same kit can run a 30-amp RV connection or step up to the 50-amp outlet when both generators are working together.

The connecting cables are integrated into the unit and measure 2 feet, which keeps the two generators close together, and the kit weighs about 2 pounds. Generac builds in 30-amp and 50-amp circuit breakers for overload protection. The trade-off is reach: the short leads give you less freedom in positioning the two units than a long-cord kit. For Generac households, though, the mid-range 7668 is the supported, warranty-friendly way to parallel the iQ3500 and GP3000i.

Specs

  • Brand and model: Generac 7668
  • Compatibility: Generac iQ3500 and GP3000i inverter generators
  • Output voltage: 120V
  • Receptacles: One 30A 120V outlet, one 50A 120V outlet
  • Circuit breakers: 30-amp and 50-amp
  • Cord length: 2 feet, integrated cables
  • Dimensions: 11 x 9.4 x 5.9 inches
  • Weight: 2 pounds

How to Choose a 50-Amp Parallel Kit

Start with brand compatibility, because it decides almost everything else. Parallel kits synchronize two inverter generators through dedicated parallel ports, and most manufacturers design their kits for their own generators. A WEN kit expects WEN parallel ports, the Champion ParaLINK expects Champion ParaLINK-ready inverters, and the Generac 7668 fits the iQ3500 and GP3000i. Standards-based kits such as the AIVOLT APV24080 work with generators that follow the ANSI/PGMA G300-2018 standard. Never assume a kit crosses brands unless the kit maker lists your exact models as compatible.

Next, decide between 120 volts and 240 volts. A 120-volt 50-amp kit, such as the Champion 100319 or WEN GNA50i, delivers its combined wattage on one leg, which is exactly what a 50-amp RV connection or a 30-amp transfer-switch inlet needs. A 240-volt kit, such as the WEN GNA240i or the AIVOLT APV24080, splits output across two legs so 240-volt appliances can run. Your generators must match the kit: 240-volt paralleling requires generators built for 240-volt parallel operation, and manufacturers warn against mixing 120-volt and 240-volt kits and generators in the same setup.

Then check the receptacles against your cord and your loads. The NEMA 14-50R is the standard 50-amp RV outlet, while an L5-30R gives a 30-amp 120-volt locking connection and an L6-30R gives a 30-amp 240-volt locking connection. Confirm the combined running wattage of your two generators against what you plan to power, remembering that a parallel pair delivers somewhat less than the sum of both nameplates in real use, and that air conditioners and pumps draw a starting surge well above their running draw. Finally, look for built-in circuit breakers on both outlets, outlet covers for outdoor use, and a cord length that lets you position the generators safely outdoors, away from windows and doors, since both engines produce carbon monoxide.

FAQ

Can I parallel two different brands of inverter generator with one kit?

Generally, no. Most parallel kits are designed for one brand’s parallel ports and synchronization system, and manufacturers instruct owners not to parallel their inverters with another brand’s units. The main exception is a standards-based kit, such as one built to the ANSI/PGMA G300-2018 parallel standard, used with generators that follow the same standard. Always confirm your exact generator models on the kit maker’s compatibility list before ordering.

Does a 50-amp parallel kit give me 240 volts?

Only if the kit and both generators are 240-volt models. A 50-amp receptacle by itself does not guarantee 240 volts: 120-volt kits such as the Champion 100319 and WEN GNA50i feed the 14-50R outlet with 120 volts for RV and transfer-switch use, while 240-volt kits such as the WEN GNA240i and AIVOLT APV24080 supply split-phase 240 volts for home loads. Check the voltage printed in the kit’s specifications and match it to your generators and your transfer equipment.

How much power do I actually get from two paralleled generators?

Plan on slightly less than the two running-watt ratings added together, and size your loads against the kit’s maximum combined output: 6000 watts for the WEN GNA50i, or 12,000 watts for the 240-volt WEN GNA240i. Starting surges from air conditioners, well pumps, and refrigerators can briefly exceed running draw by a wide margin, so leave headroom rather than loading the pair to its limit.

Can I run only one generator with the parallel kit connected?

The kit only does its job when both generators are running and sharing the load. For small loads, most owners disconnect the kit and run a single generator, which saves fuel and run time. Follow the connection sequence in your kit’s manual: connect the parallel leads with both generators off, start the units, and never connect or disconnect parallel cables while a generator is running.

Conclusion

A 50-amp parallel kit turns two portable inverter generators into a single, more capable power source, and the right choice depends on your brand and your voltage. Champion owners get a complete factory package in the 100319 ParaLINK, WEN owners can choose between the budget 120-volt GNA50i and the premium 240-volt GNA240i, Generac’s 7668 keeps iQ3500 and GP3000i pairs on the supported path, and the AIVOLT APV24080 covers standard-port 240-volt machines. Match the kit to your generators’ parallel system, confirm the receptacle matches your RV cord or transfer switch, and check the product page for current offers before you buy.

Explore Our Guides & Free Tools