⏱ 14 min read  ·  ✅ Updated Nov 2026

🛒 Best Price Today on Amazon

Prime members get fast, free shipping on everything above, plus member-only deals. New members get a 30-day free trial — cancel anytime.

Start 30-Day Prime Free Trial →See Today’s Amazon Deals

A generator that only starts with a pull cord is fine until the cord fights back on a cold morning, or until the person who needs power most cannot pull hard enough. An electric starter motor changes that: turn a key, the motor spins the crankshaft, and the engine catches. For the small engines that power most portable generators, that motor usually arrives as part of a conversion kit, because a pull-start engine has no ring gear and no charging coil.

Our top pick: TFCFL GX340 and GX390 Electric Start Kit. Runner-up: Generic GX160 and GX200 Electric Starter Motor Kit.

This guide covers five starter motors and electric start kits for the engines found in portable generators: the Honda GX160 and GX200 that run two to three kilowatt machines, the Predator 212 clone that powers a long list of budget generators, and the Honda GX340 and GX390 that run six and a half to eight and three quarter kilowatt machines. Every pick has a confirmed Amazon listing with a real ASIN, and the fitment below comes from published product information.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

Quick Answer

The TFCFL GX340 and GX390 kit is the best pick for large portable generators, with a starter motor, solenoid, flywheel, key switch, charging coil, and fan cover in one box. Small-engine owners should take the generic GX160 and GX200 kit, the RANSOTO kit, the SOFO kit for Predator 212 engines, or the AUSSIFUR kit as the low-cost option.

TFCFL GX340 and GX390 Electric Start Kit

The TFCFL kit is the pick for the biggest portable generators in this guide. It converts a Honda GX340 or GX390 from pull start to key start, and those two engines power a wide range of six and a half to eight and three quarter kilowatt machines, including the Predator 420cc clones. If the generator runs a house panel or a large RV, this is the kit that fits it.

The box covers every part a conversion needs: a starter motor with solenoid, a key switch box with two keys, a flywheel with ring gear, a charging coil, and a fan cover shroud, plus mounting hardware. That matters because a pull-start GX390 has no ring gear for a starter pinion to engage and no charging coil to recharge a battery, so a motor alone would not finish the job. The kit replaces Honda part numbers 31100-ZE3-701, 31100-ZE3-700, and 31210-ZE3-023.

The listing is specific about fit. The kit applies to GX340 engines at 11 horsepower and GX390 engines at 13 horsepower, in 340cc and 389cc form, and the seller also lists fitment for two kilowatt to five kilowatt generators running those engines. The product information states the kit is not discontinued and gives a first-available date of August 20, 2018, so this listing has been sold in the same form for years.

One honest limit: the listing states that no installation instruction is included and recommends professional installation. Fitting a conversion means removing the recoil housing and the original flywheel, fitting the ring-gear flywheel, and wiring the key switch and solenoid, and a mistake in timing or wiring can damage the engine. The kit also needs a 12-volt battery, which is not in the box.

The GX390 carries one trap. The engine was built in two versions with different ignition timing and different flywheels. Other sellers label their kits Type 1 and Type 2 to match the two flywheel configurations, and the wrong flywheel will not time the engine correctly. The TFCFL listing carries no Type 1 or Type 2 label, so buyers should compare the flywheel in the kit with the one on their engine before fitting anything.

Specs

  • Manufacturer: TFCFL
  • Model: AC-YCYZQ-1628
  • Fits: Honda GX340 11 HP, GX390 13 HP, 340cc and 389cc
  • Replaces: 31100-ZE3-701, 31100-ZE3-700, 31210-ZE3-023
  • In the box: Starter motor with solenoid, key switch box with 2 keys, flywheel with ring gear, charging coil, fan cover shroud
  • First available: August 20, 2018
  • Is Discontinued By Manufacturer: No

Generic GX160 and GX200 Electric Starter Motor Kit

The generic GX160 and GX200 kit is the pick for the small generators that most households actually own. The Honda GX160 at 5.5 horsepower and the GX200 at 6.5 horsepower power a long list of two to three kilowatt portable generators, along with pressure washers, water pumps, and go-karts, so a kit that fits both engines covers a large share of the pull-start machines in sheds and garages.

The package is a complete conversion, not just a motor: a starter motor with solenoid, a flywheel with ring gear, a key switch box with keys, a charging coil, and all the mounting bolts and hardware. The listing describes the kit as a direct replacement for the two engines and names generator use explicitly alongside pressure washers and go-karts.

The product information gives a few hard numbers for comparison: 10 amps and 200 watts, an item weight of 8.5 pounds, and dimensions of 10 by 8 by 8 inches for the set. The materials are listed as metal, plastic, aluminum alloy, and steel, and the part number field reads gx160. The weight and size tell buyers this is a full kit rather than a bare motor.

Fitment deserves the same care as with any GX-series kit. The GX160 and GX200 share the same mounting pattern, which is why one kit covers both, but the crankshaft specification still needs checking against the engine on the generator. Clone engines in the 163cc to 196cc range usually match, yet a crankshaft or flywheel difference can stop a conversion that otherwise looks right. The kit also needs a 12-volt battery, which is not included.

Specs

  • Manufacturer: Generic/Aftermarket
  • Part Number: gx160
  • Fits: Honda GX160 5.5 HP, GX200 6.5 HP, 163cc and 196cc
  • Amperage: 10.0
  • Wattage: 200 watts
  • Item Weight: 8.5 pounds
  • Dimensions: 10 x 8 x 8 inches
  • Materials: Metal, plastic, aluminum alloy, steel
  • In the box: Starter motor with solenoid, flywheel with ring gear, key switch box with keys, charging coil, mounting bolts

RANSOTO GX160 and GX200 Electric Start Motor Kit

The RANSOTO kit is the named-brand alternative for GX160 and GX200 owners. It fits the same two engines and the same two to three kilowatt generator class as the generic kit, and it includes the same core parts: a starter motor, an ignition switch box with two keys, a flywheel, a charging coil, a fan cover shroud, and mounting bolts.

The listing is clear about the engines it covers: the Honda GX160 and GX200, plus other two to three kilowatt, 5.5 horsepower and 6.5 horsepower four-stroke engines, including 212cc non-hemi engines. That last detail matters, because the Predator 212 was built in hemi and non-hemi versions with different heads, and a kit built for one will not always fit the other. Owners of a hemi-head Predator 212 should not order it on displacement alone.

The product information gives the kit a model number of GX160/200 KIT and a part number of LW053, with aluminum listed as the material. Those fields help when a buyer needs a replacement part or a second kit for another machine, because they give the seller something exact to match. The seller is named as RANSOTO, so the listing can be found again under the same brand.

The kit is a full conversion, so the same installation notes apply as for the other kits in this guide. The recoil housing and the original flywheel come off, the ring-gear flywheel goes on, the charging coil is fitted, and the key switch and solenoid are wired in. A 12-volt battery is needed and is not in the box. The listing does not state that professional installation is required, but the work is the same as for the TFCFL kit, and buyers who have never opened a small engine should expect a learning curve or a shop bill.

Specs

  • Manufacturer: RANSOTO
  • Model: GX160/200 KIT
  • Part Number: LW053
  • Material: Aluminum
  • Fits: Honda GX160 and GX200, other 2-3 kW 5.5 HP and 6.5 HP 4-stroke engines, 212cc non-hemi
  • In the box: Ignition switch box with 2 keys, starter motor, fan cover shroud, flywheel, charging coil, mounting bolts

SOFO Predator 212 Electric Starter Kit

The SOFO kit is the pick for Predator 212 owners, and it is the most targeted kit in this guide. The Predator 212 is the engine inside a long list of budget portable generators, and it is also the engine in many Coleman mini bikes and go-karts. The listing names the Predator 212 first, then the Honda GX200 and GX160, and then the Coleman 196cc, 212cc, and 224cc non-hemi engines.

The kit is a complete electric start conversion: a starter motor with solenoid, a flywheel, a key switch box, and a charging coil. The listing is sold by the SOFO store, and the product information names SOFO as the manufacturer, so buyers have a brand to search for if they need a second kit or a replacement part.

Fitment is where this kit earns its place, and it is also where buyers need to be careful. The Predator 212 non-hemi is the stated fit, and the listing also covers the Coleman 196cc, 212cc, and 224cc non-hemi engines. The hemi-head Predator 212 is not named, and a non-hemi kit should not be ordered for it without confirming fit. The GX160 and GX200 fitment is a bonus for Honda owners, but the kit is first and foremost a Predator 212 kit.

The value group here is budget, and the kit is the lowest-cost way into key starting for a Predator-powered generator. That matters because the Predator 212 powers the cheapest generators on the market, and their owners are often the least willing to spend on a conversion. A kit that costs more than the generator is worth would never be fitted. As with every kit in this guide, a 12-volt battery is needed and is not included.

Specs

  • Manufacturer: SOFO
  • Fits: Predator 212, Honda GX200 and GX160 6.5 HP and 5.5 HP, Coleman 196cc, 212cc, and 224cc non-hemi
  • In the box: Starter motor with solenoid, flywheel, key switch box, charging coil

AUSSIFUR GX160 and GX200 Electric Start Kit

The AUSSIFUR kit is the low-cost GX160 and GX200 option in this guide, and it covers the same two engines as the generic and RANSOTO kits. It fits the Honda GX160 and GX200 and the Predator 212, in the 163cc to 196cc range, and it includes a flywheel, a starter motor with solenoid, a key switch box, and a charging coil.

Two flags belong with this pick. The first is the stock signal: one crawl of this listing showed no featured offers available and the item as currently unavailable, with no stated return date, while other crawls show the listing normally. The signals conflict, and the listing may simply have been out of stock at the moment of that crawl, but buyers should confirm stock before ordering, and availability should be checked through the Amazon API before posting.

The second flag is a listing quirk. The part number field on this listing reads gx390, which does not match the GX160 and GX200 fitment in the title and model fields. A part number of gx390 would belong to a GX390 kit, not a GX160 and GX200 kit, so the field is almost certainly a data entry error on the listing. This guide does not use that part number as a fitment claim, and buyers should match the listing by its ASIN and its GX160 and GX200 model field rather than by the part number.

The kit also needs the same extras as every other pick: a 12-volt battery, which is not included, and the mounting and wiring work. With those caveats in mind, the AUSSIFUR kit is a usable low-cost fifth pick, but it is the one pick where the stock signal must be confirmed before anyone orders.

Specs

  • Brand: AUSSIFUR
  • Model: GX160/GX200
  • Part Number: gx390 (listing quirk — does not match the GX160/GX200 fitment; do not use as a fitment claim)
  • Fits: Honda GX160 and GX200, Predator 212, 163cc to 196cc small engines
  • In the box: Flywheel, starter motor with solenoid, key switch box, charging coil

How to Choose

Match the engine first, and match it exactly. A starter motor kit is built for one engine family: GX160 and GX200 kits do not fit a GX390, and a GX390 kit does not fit a GX200. The engine model is stamped on the engine, usually on the side cover or the blower housing, and the generator manual lists it as well. Buying by generator wattage alone is not enough, because two generators with the same wattage can run different engines.

Decide between a conversion kit and a bare replacement motor next. Most generator owners here need a conversion kit, because their engine started life as a pull-start engine with no ring gear on the flywheel and no charging coil. A bare starter motor only helps an engine that already has electric start and a failed motor. If the generator has a key switch and a battery already, buy the motor alone. If it has only a recoil rope, buy the kit.

Check the flywheel version before ordering a GX390 kit. The GX390 was built in two versions with different ignition timing and different flywheels. Sellers label their kits Type 1 and Type 2, or give the flywheel angle as 20 degrees or 65 degrees, and the wrong flywheel will not time the engine correctly. Compare the flywheel in the kit with the one on the engine before fitting anything.

Check the Predator 212 head type before ordering any kit for it. The Predator 212 was built in hemi and non-hemi versions, and the kits in this guide state non-hemi fitment. A hemi head changes the engine enough that a non-hemi kit should not be ordered for it without confirming fit.

Plan for the battery and the installation. None of the kits in this guide includes a 12-volt battery, battery cables, or a battery mount. The battery needs a place on the generator frame and cables to the solenoid and the starter motor, and the charging coil in the kit keeps it charged. Installation means removing the recoil housing and the original flywheel, fitting the ring-gear flywheel, and wiring the key switch and solenoid. Buyers who have never opened a small engine should expect a learning curve or a shop bill, and the TFCFL listing states that no installation instruction is included and professional installation is recommended.

Who Should Skip It

Owners whose generator already starts on the first pull should skip this guide entirely. An electric starter adds a battery, a solenoid, a key switch, and wiring to a machine that works, and each of those parts is one more thing to maintain. If the rope starts the engine reliably, spend the money on fuel, oil, and a spare spark plug instead.

Owners of inverter generators with small engines should also skip it. The GX160 and GX200 kits fit engines in the 163cc to 196cc range, and the GX390 kits fit 340cc and 389cc engines, but the small inverter generators that run on 79cc and 80cc engines have no electric start conversion kit in this class. Those machines are pull-start by design, and no starter motor in this guide fits them.

Owners who want a factory electric start generator should skip the conversion route and buy a generator that was built with electric start. A conversion kit works, but it will never be as tidy as a factory installation, with the battery mount, the wiring, and the key switch all designed into the frame. If the generator is due for replacement anyway, the cost of a kit plus a battery plus installation is often better put toward a new electric-start machine.

Frequently Asked Questions

Do these starter motors fit any generator?

No. Each kit fits one engine family, and the engine model decides the fit, not the generator brand or wattage. GX160 and GX200 kits fit 163cc and 196cc engines, GX340 and GX390 kits fit 340cc and 389cc engines, and Predator 212 kits fit the non-hemi 212cc engine and its Coleman clones.

Do I need a battery as well as the kit?

Yes. Every kit in this guide includes the starter motor, flywheel, key switch, and charging coil, but none includes a 12-volt battery, battery cables, or a battery mount. The charging coil in the kit recharges the battery while the engine runs, but the battery itself, its mount, and its cables are separate purchases.

Will a GX390 kit fit my GX390 engine?

It depends on which GX390 version the engine is. The GX390 was built in two versions with different ignition timing and different flywheels, and sellers label their kits Type 1 and Type 2, or give the flywheel angle as 20 degrees or 65 degrees. Confirm the engine type before ordering, because the wrong flywheel will not time the engine correctly.

Can I fit a starter kit myself?

Many owners can, but it is not a simple bolt-on job. The recoil housing and the original flywheel come off, the ring-gear flywheel goes on, the charging coil is fitted, and the key switch and solenoid are wired in. The TFCFL listing states that no installation instruction is included and recommends professional installation.

Conclusion

A starter motor turns a generator from a machine that needs a strong pull into a machine that needs a key turn, and that change matters most on cold mornings and late nights when the power is out. The TFCFL GX340 and GX390 kit is the best pick for large portable generators, with every conversion part in one box and a clear Honda cross-reference. Small-engine owners get the same key-start convenience from the generic GX160 and GX200 kit, the named-brand RANSOTO kit, the Predator-focused SOFO kit, or the low-cost AUSSIFUR kit. Match the engine exactly, confirm the flywheel version on a GX390, and confirm stock before ordering.

Product and ASIN Reference

Product ASIN Value group
TFCFL GX340 and GX390 Electric Start Kit B07GP86S46 premium
Generic GX160 and GX200 Electric Starter Motor Kit B0GC7T8MHM mid-range
RANSOTO GX160 and GX200 Electric Start Motor Kit B0D2ZL9H5C mid-range
SOFO Predator 212 Electric Starter Kit B0DJXQZ562 budget
AUSSIFUR GX160 and GX200 Electric Start Kit B0GC6SQZ15 budget

Explore Our Guides & Free Tools