🛒 Best Price Today on Amazon
Prime members get fast, free shipping on everything above, plus member-only deals. New members get a 30-day free trial — cancel anytime.
Anyone who services small engines ends up with the same bench problem: a coffee can of mixed screws, a tray of carburetor jets, loose O-rings, spare fuses and a handful of hose clamps that all look alike. A drawer parts cabinet fixes that in one move. Each size of fastener gets its own clear drawer, labeled once and found in seconds the next time a generator comes in for a carb cleaning or a fuel line swap.
The five cabinets below cover the useful range for a home shop, from 39 drawers up to 64. All use clear drawers so contents stay visible, and all can sit on a bench; most can also hang on a wall or stack. One honest limit applies to every pick here: these drawers suit fasteners and small fittings, not bulky parts. A recoil housing or fuel tank belongs in a bin or on a shelf.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
Short on time? The Akro-Mils 10144 is the balanced pick, mixing deep drawers for fittings with slim ones for jets and screws. The Akro-Mils 10164 doubles down on count with 64 uniform drawers for serious fastener sorting. The IRIS USA 44-drawer cabinet stacks and wall-mounts, the CRAFTSMAN CMST40739 gives 30 small drawers plus nine large ones in a compact square frame, and the Stalwart 41-drawer unit trades width for height with one wide bottom compartment for bulkier small parts.
Akro-Mils 10144 44-Drawer Cabinet
The 10144 is the cabinet most small shops end up with, and the layout explains why. Twelve deeper drawers swallow hose clamps, fuel fittings and spark plug boots, while 32 slim drawers take jets, needles, screws and O-rings by size. The housing is high-impact polystyrene, stiff enough to stay square when every drawer is loaded with steel hardware.
Drawers pull smoothly and can be lifted out for a trip to the machine, then dropped back in. Each drawer has molded slots for snap-in dividers, handy when one drawer holds three sizes of woodruff keys, and a label area on the drawer front takes a paper tag or a strip of tape.
Specs
– Drawers: 44 total, 32 small and 12 large
– Overall size: 20 in W x 6.4 in D x 15.8 in H
– Large drawer inside: 4-7/8 x 4-1/4 x 2 in
– Small drawer inside: 5-1/4 x 1-11/16 x 1-1/2 in
– Housing: high-impact polystyrene, made in USA
– Model: 10144, black frame with clear drawers
Akro-Mils 10164 64-Drawer Cabinet
Where the 10144 mixes sizes, the 10164 goes all in on count: 64 drawers of one uniform small size in the same footprint. That suits a bench that sorts fasteners by thread and length — one drawer per size of metric bolt, per jet number, per fuse size — with no deep drawers sitting half empty.
The housing and drawers match the 10144 for material and feel, and dividers come in the box, so a single drawer can hold two lengths of the same screw size in split cells. Keyhole slots on the back panel let the cabinet hang on the wall above the bench.
Specs
– Drawers: 64, all one small size
– Overall size: 20 in W x 6 in D x 16 in H
– Drawer inside: 5-1/4 x 1-11/16 x 1-1/2 in
– Housing: high-impact polystyrene, made in USA
– Dividers included for splitting drawers into cells
– Model: 10164, black frame with clear drawers
IRIS USA 44-Drawer Small Parts Cabinet
IRIS builds this cabinet in the USA with stacking in mind: the frame registers with the unit below it, so two or three cabinets form a steady tower on a bench instead of a wobbling pile. Mounting slots also let it hang on a wall above the work area, which suits benches that are short on surface.
The mix of wide and slim drawers runs a touch deeper than the Akro small drawers, which helps with longer bench items like cotter pins, valve cores and cable ties folded in half. Drawer fronts are clear with room for a label, so a wall of these still reads at a glance.
Specs
– Drawers: 44, mix of wide and slim sizes
– Overall size: 19.5 in W x 7 in D x 15.5 in H
– Large drawer: 6.87 x 4.31 x 2.12 in
– Small drawer: 6.87 x 2.12 x 1.62 in
– Stackable frame with wall-mount slots, made in USA
– Model: 587632, black
CRAFTSMAN CMST40739 39-Compartment Organizer
CRAFTSMAN takes a squarer path: 39 drawers in a frame about as tall as it is wide, which fits the end of a bench or a shelf bay where a 20-inch cabinet would overhang. Thirty small drawers handle the fastener sorting, and nine large drawers take the bulkier bench bits like hose clamps, petcocks and plug caps.
The transparent polypropylene drawers keep contents visible, and the maker notes the cabinet can be wall mounted or stacked one on another, so a second unit can join later when the fastener collection outgrows the first.
Specs
– Drawers: 39 total, 30 small and 9 large
– Overall size: 14.2 in W x 6.2 in D x 14.2 in H
– Drawers: transparent polypropylene
– Mounting: wall-mount ready and stackable
– Model: CMST40739
Stalwart 41-Drawer Storage Cabinet
The Stalwart flips the usual layout: a narrow, tall frame with 40 small drawers stacked above one wide bottom compartment. That bottom drawer is the draw here — it fits the bulkier small items the slim drawers cannot, like coils of fuel line, a spare petcock or two, and bundles of cable ties.
The drawers are clear polypropylene with finger pulls, so a size check takes a glance rather than a rummage. The narrow footprint suits the end of a bench or the wall beside a door, where a wide cabinet would block traffic. It is a light unit, easy to carry to the work.
Specs
– Drawers: 41 total, 40 small plus 1 wide bottom compartment
– Small drawer: 2 in W x 4.5 in D
– Bottom compartment: 10.5 in W x 4.5 in D
– Overall size: 11.75 in W x 17.5 in H
– Material: impact-resistant polypropylene, clear drawers with finger pulls
– Weight: about 5 lb
How to choose
Count your categories first. A generator bench usually needs drawers for carb jets, metric and SAE screws, O-rings, fuses, hose clamps and electrical terminals. If that list runs past forty items, the 64-drawer Akro-Mils keeps one size per drawer; below that, a 39 to 44 drawer cabinet leaves room to grow.
Match drawer size to the parts. Slim drawers suit jets, needles and screws. Deeper drawers earn their keep for fittings, clamps and plug boots. Anything bigger — pull cords, air filters, a spare recoil housing — belongs in open bins, not in a parts cabinet.
Check the frame and the stops. Every cabinet here uses a molded plastic frame rather than steel; for fastener weight that is plenty, and it keeps the unit light enough to move. Prefer drawers with a stop near the end of travel, so a loaded drawer does not slide all the way out and spill when you pull it with one hand. Finally, decide on placement: wall mounting frees bench space, while stacking suits anyone who rearranges the shop often. Label every drawer the day you fill it; unlabeled drawers turn back into a junk can within a month.
FAQ
Will these drawers hold carburetor jets and small engine hardware?
Yes. Jets, needles, screws, O-rings and fuses are exactly the size class these cabinets are built for. The deeper drawers in the mixed layouts also fit hose clamps and small fittings.
Can I hang a loaded cabinet on the wall?
The IRIS and CRAFTSMAN cabinets and both Akro-Mils models are built for wall mounting, but anchor into studs or solid backing. A cabinet full of steel fasteners is heavier than it looks.
How do I keep sizes from mixing when one drawer holds two lengths?
Use the divider slots molded into the drawers, or add divider packs, and put the size on the label. One size per cell keeps a rebuild from turning into a guessing game.
What should not go in a parts cabinet?
Bulky or heavy items: fuel tanks, recoil housings, mufflers and long cables. They bend drawer bottoms and waste the fine sorting. Use bins or shelves for those.
Verdict
For most generator benches, the Akro-Mils 10144 is the first buy: the mix of deep and slim drawers matches the way small engine hardware actually accumulates. Sorters with long fastener lists should step up to the 10164. The IRIS 44-drawer is the stacking pick, the CRAFTSMAN suits tight shelf space, and the Stalwart earns its place where one wide drawer for bulkier small parts matters more than width.





Write Your Review
No reviews yet. Be the first to share your experience!