🛒 Best Price Today on Amazon
Prime members get fast, free shipping on everything above, plus member-only deals. New members get a 30-day free trial — cancel anytime.
A trailer is one of the easiest big-ticket items to steal. It sits outside, rolls on its own wheels, and most couplers accept any hitch ball of the right size. A thief with a tow vehicle can be gone in under a minute when nothing slows the hookup down. The right lock breaks that fast, quiet routine and pushes a thief toward an easier target.
Good trailer security works in layers. A coupler lock blocks the ball socket or pins the latch so the trailer cannot be coupled. A receiver lock keeps a ball mount from being pulled. A wheel lock covers storage.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
For most owners, the Master Lock 379ATPY is the coupler lock to buy first, since one unit fits nearly every coupler size on the road. The Reese Towpower 72783 covers the same ground with a ratcheting arm. The BOLT 7018447 is the smartest receiver lock here, because it learns your truck key. The Master Lock 2848DAT keyed alike set pairs a receiver lock with a latch lock on one key. For storage, the Trimax TCL75 wheel chock lock adds a visible block no coupler lock can match.
Master Lock 379ATPY Universal Trailer Coupler Lock
The 379ATPY is the lock you will see on boat ramps and in campgrounds everywhere, and the reason is fit. Its body slides over the coupler and blocks the ball socket itself, and the adjustable design covers 1-7/8 inch, 2 inch, and most 2-5/16 inch couplers. One lock can move between a utility trailer and a travel trailer with no second purchase.
Because the lock occupies the socket, a thief cannot drop the coupler onto a ball and drive off. The advanced locking mechanism resists picking and prying, and the housing wraps the coupler nose so there is little room to work a tool into the gap. It installs in seconds with no tools, which matters: a quick lock gets used every time.
Specs
- Fit: 1-7/8 in, 2 in, most 2-5/16 in couplers
- Style: socket-blocking universal coupler lock
- Mechanism: resists picking and prying
- Install: tool-free, slides over coupler nose
- Keys: two included, keyed alike versions available
Reese Towpower 72783 Universal Coupler Lock
The 72783 takes a different approach. Instead of a fixed body sized to one socket, it uses a ratcheting arm with multiple locking positions that clamps over the coupler and tightens down. That lets it snug up on coupler shapes a fixed lock might fit loosely, and a tight fit leaves less play for a pry tool.
The body is heavy-duty steel with a bright yellow and chrome finish. The color is not decoration: a lock a thief can see from the street does part of its work before anyone touches the trailer.
Specs
- Fit: 1-7/8 in to 2-5/16 in couplers
- Style: ratcheting adjustable coupler lock
- Locking positions: multiple, for a snug clamp
- Build: heavy-duty steel, yellow and chrome finish
- Install: tool-free, clamps over coupler
BOLT 7018447 5/8 Inch Receiver Lock
Receiver locks solve a different problem. The pin holding your ball mount is usually a plain bent pin with a clip, and anyone can pull it. The BOLT 7018447 replaces it with a 5/8 inch locking pin, the size used by Class III, IV, and V hitches with 2 inch and 2-1/2 inch receivers.
The clever part is the key. Insert your ignition key the first time, turn it, and the lock codes itself to that key permanently. This version is cut for Ford, Lincoln, and Mercury keys; sibling versions cover other brands. One key then opens any BOLT locks you own. A six-plate tumbler sidebar resists picking and bumping, the pin is stainless steel, and a shutter over the keyway keeps out dirt and road spray. Confirm your key brand matches first, because a coded lock cannot be recoded.
Specs
- Pin: 5/8 in stainless steel
- Fit: Class III, IV, V hitches, 2 in and 2-1/2 in receivers
- Key: learns Ford, Lincoln, Mercury vehicle key
- Cylinder: six-plate tumbler sidebar, pick and bump resistant
- Keyway: shutter against dirt and moisture
Master Lock 2848DAT Keyed Alike Trailer Lock Set
The 2848DAT set answers the layering advice in this guide with a single key. The box holds two locks, a receiver lock and an adjustable coupler latch lock, both keyed alike, so one key secures the trailer at both ends of the connection.
The receiver lock is a push-to-lock pin that fits 1/2 inch and 5/8 inch receivers, covering Class I through IV hitches. The latch lock is stainless steel, adjusts from 9/16 inch to 2-3/4 inch, and pins the coupler latch shut so it cannot open or close around a ball. A latch pin alone is the lightest form of coupler security, but combined with the receiver lock it stops both the quick hookup and the ball-mount swap. For a stored trailer, treat it as the second layer and add a socket-blocking or wheel lock as the first.
Specs
- Contents: receiver lock plus coupler latch lock, keyed alike
- Receiver fit: 1/2 in and 5/8 in pins, Class I–IV
- Latch lock span: adjusts 9/16 in to 2-3/4 in
- Latch lock build: stainless steel
- Locking: push-to-lock receiver pin
Trimax TCL75 Deluxe Universal Wheel Chock Lock
When a trailer lives in storage, the wheel is the point to guard. The TCL75 is a chock-style wheel lock: two arms clamp around the tire and lock together, chocking the wheel so it cannot roll, in a way obvious from across the lot. It fits tires 7 to 11.25 inches wide, covering most trailer and camper rubber.
The body is heavy-gauge steel with a powder-coated finish, and the arms are rubber coated so they do not chew up wheel finishes. The mechanism resists picking, and the dual action keeps a parked trailer from creeping on a slope. It is bigger and slower to fit than a coupler lock, which is the point for a trailer that will sit for a month.
Specs
- Fit: tires 7 in to 11.25 in wide
- Style: clamp-on wheel chock lock
- Build: heavy-gauge steel, powder-coated finish
- Arms: rubber coated to protect wheel finishes
- Use: long-term storage, trailers, campers, boats
How to choose
Match the lock to the situation the trailer is in most. A trailer towed weekly needs a receiver lock like the BOLT or the 2848DAT set, because the risk window is the stop at the store or the ramp. A trailer that sits needs a socket-blocking coupler lock, the 379ATPY or the Reese 72783. A trailer in long-term storage needs the wheel lock too.
Know the two coupler-lock styles. Socket-blocking locks fill or cover the ball socket, so no ball can enter; they protect an unhitched trailer. Latch locks pin the latch handle, so a closed coupler stays closed; they are light and fast, but on an open, unhitched coupler they do less. Serious setups use both.
Check sizes before buying: couplers come in 1-7/8, 2, and 2-5/16 inch ball sizes, and receivers take 1/2 inch pins on small classes and 5/8 inch pins on Class III and up. Think about keys, too. Keyed alike sets and key-learning locks remove the spare-key problem, which sounds minor until you are kneeling in wet gravel trying three similar keys.
FAQ
Will one coupler lock fit both of my trailers?
Usually, yes. Universal models like the 379ATPY and the Reese 72783 adjust across the 1-7/8, 2, and 2-5/16 inch sizes that cover nearly all light trailers. Check that the lock closes snugly on each coupler, since a loose fit weakens it.
Should I lock the trailer while it is hitched to my truck?
Yes. A receiver lock stops someone from pulling the pin, dropping your coupler onto their ball mount, and leaving with the whole rig. A latch lock adds a second barrier.
Are wheel locks better than coupler locks?
They guard different things. A wheel lock keeps the trailer from rolling at all and is highly visible, which suits storage. A coupler lock is smaller, faster, and travels better. Stored trailers are best served by both.
What if I lose the key to a BOLT receiver lock?
Because the lock codes itself to your vehicle key, a spare vehicle key from the dealer opens it. The key you already carry is the lock key.
Verdict
Buy the Master Lock 379ATPY for one proven coupler lock that fits almost anything, or the Reese 72783 if your coupler shape favors a ratcheting clamp. Add the BOLT 7018447 to kill spare keys on a Ford-family tow vehicle, or the 2848DAT set for a matched one-key kit. Put the Trimax TCL75 on any trailer that sleeps outside. Two layers, two problems for a thief, and a trailer that stays put.





Write Your Review
No reviews yet. Be the first to share your experience!