🛒 Best Price Today on Amazon
Prime members get fast, free shipping on everything above, plus member-only deals. New members get a 30-day free trial — cancel anytime.
- Quick answer
- Lippert Trailer Bearing Replacement Kit for 3,500-lb Axle Hubs
- Lwlusup Pack of 2 Trailer Axle Bearings Kit L68149 L44649
- WESTERNPRIME Set of 4 Trailer Tandem Axle Bearing Kits
- Tgkjmad 4 Sets 7,000 lb Trailer Axle Bearing Kits
- Taxutor 2 Sets 25580 14125A Trailer Bearings Kits
- How to choose
- FAQ
- Verdict
Every hub service ends the same way: the old grease seal comes out bent and scored, and it can never go back in. A seal is a one-time part, so a full bearing repack always needs a fresh one. That is why experienced owners buy the seal as part of a boxed kit rather than as a lone part. A good kit bundles the double-lip seal with the small hardware that also gets replaced during a service — cotter pins, tang washers, spindle nuts and dust caps — so one box covers one hub or one whole axle.
The kits below are multi-piece service kits, not single seals sold loose. They match the two hub families that cover most utility, boat and cargo trailers: 3,500 lb axles with #84 spindles, and heavier 5,200 to 7,000 lb axles with #42 spindles.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
For most 3,500 lb axles, the Lippert Trailer Bearing Replacement Kit is the cleanest single-hub service box, with a double-lip seal, cotter pin and tang washer from the axle maker itself. The Lwlusup Pack of 2 covers both hubs on a 3,500 lb axle, while the WESTERNPRIME Set of 4 suits tandem axles. For heavier axles, the Tgkjmad 4 Sets kit handles 7,000 lb hubs with two seal sizes included, and the Taxutor 2 Sets kit covers 5,200 to 7,000 lb axles with caps and plugs.
Lippert Trailer Bearing Replacement Kit for 3,500-lb Axle Hubs
Lippert builds a large share of the axles under travel trailers and cargo trailers, and this kit is its own service box for one 3,500 lb hub. Inside are the inner and outer bearing cones, the matching races, a double-lip grease seal with a 1.719 inch inner diameter, a 1.75 inch cotter pin and a tang spindle washer. That mix is the point of a seal kit: the seal is fresh, and the locking hardware that should never be reused is fresh with it.
The seal is the common 10-19 size used on #84 spindles, so the kit also fits many Dexter and generic 3,500 lb hubs. Buying from the axle maker removes the guesswork of cross-referencing numbers from a worn original, and the single-hub box doubles as an ideal spare kit for roadside repairs.
Specs
- Axle capacity: 3,500 lb hubs, #84 spindle
- Seal: double-lip grease seal, 1.719 in inner diameter (10-19)
- Bearings: inner and outer cones with races included
- Hardware: 1.75 in cotter pin, tang spindle washer
- Coverage: one hub per kit
- Maker part number: PP-BGK-3 (model 2023133980)
Lwlusup Pack of 2 Trailer Axle Bearings Kit L68149 L44649
This boxed pair is built around the most common 3,500 lb bearing combination on the road: an L68149 inner bearing and an L44649 outer bearing. Each set brings its own 171255TB double-lip grease seal, tang washer and cotter pin, so one purchase services both hubs on a single axle with nothing left to hunt down.
The seals measure 1.719 inches inside and 2.565 inches outside, the standard 10-19 fit for #84 spindles. The spring behind the seal lip keeps grease in and water and road grit out, which matters on boat trailers dunked at the ramp. Two sets means two hubs, so tandem owners need two boxes.
Specs
- Axle capacity: 3,500 lb, #84 spindle
- Bearings: L68149 inner, L44649 outer, with races
- Seals: 171255TB double lip, 1.719 in x 2.565 in (10-19)
- Hardware: tang washers and cotter pins for both hubs
- Coverage: 2 sets, one full axle
- Part number: TABK-2SET
WESTERNPRIME Set of 4 Trailer Tandem Axle Bearing Kits
WESTERNPRIME packages four complete hub sets in one box, aimed at tandem 3,500 lb axles and owners who service a small fleet. Each set carries the L68149 and L44649 bearings with their races and a double-lip 10-19 grease seal with a reinforced spring behind the lip. Four sets means four hubs — both axles done in a single session.
Servicing every hub at once is the right habit on a tandem. Bearings and seals age together, and a seal that looks fine today is the one that leaks grease onto a brake shoe next season. Confirm your hubs use the L68149/L44649 pairing before ordering; if they do, this box also stocks the shelf for the next service round.
Specs
- Axle capacity: 3,500 lb tandem axles, #84 spindle
- Bearings: L68149/L68111 inner, L44649/L44610 outer sets
- Seals: 4 double-lip 10-19 seals (171255TB), spring reinforced
- Coverage: 4 sets, four hubs
- Use case: full tandem service or fleet spares
- Brand line: WPS (WESTERNPRIME)
Tgkjmad 4 Sets 7,000 lb Trailer Axle Bearing Kits
Heavy trailers need bigger hardware, and this Tgkjmad box is built for 7,000 lb hubs on #42 spindles. It uses the 25580 inner and 14125A outer bearings found in most 8-lug hubs, and it includes both common seal sizes for this class — the 10-36 and the 10-10 double-lip seals — so the kit still fits if your hubs use the alternate seal bore. Four full sets cover a tandem axle end to end, with spindle nuts, cotter pins, washers, 2.72 inch dust caps and rubber plugs for E-Z Lube style hubs. Check your bearing numbers first: hubs built with the 15123 outer bearing need a different box.
Specs
- Axle capacity: 7,000 lb hubs, #42 spindle, 8-lug
- Bearings: 25580 inner, 14125A outer, with races
- Seals: double-lip 10-36 and 10-10 sizes included
- Hardware: spindle nuts, cotter pins, washers, 2.72 in dust caps, rubber plugs
- Coverage: 4 sets, four hubs
- Fit note: tandem axles, E-Z Lube compatible caps
Taxutor 2 Sets 25580 14125A Trailer Bearings Kits
The Taxutor kit covers the same heavy bearing pairing as the Tgkjmad box — 25580 inner and 14125A outer — but packages two sets for a single 5,200 to 7,000 lb axle. Each set includes the grease seal, spindle nut, washer, cotter pin, a 2.72 inch dust cap and its rubber plug, making it a tidy one-axle service box for equipment and dump trailers.
The seals in this class carry a 2.25 inch inner diameter for the larger spindle journal, and the double-lip design holds grease in during long highway runs. Verify the outer bearing number before ordering: some 6,000 lb hubs use a 15123 outer bearing instead of the 14125A, and the two seat differently.
Specs
- Axle capacity: 5,200 to 7,000 lb axles
- Bearings: 25580 inner, 14125A outer, with races
- Seals: double-lip grease seals sized for #42 spindles
- Hardware: spindle nuts, washers, cotter pins, 2.72 in dust caps, rubber plugs
- Coverage: 2 sets, one axle
- Bearing standard: ABEC 3
How to choose
Begin with the bearing numbers, not the trailer weight alone. Pull one hub and read the numbers stamped on the bearing cones: L68149/L44649 points to a 3,500 lb kit, while 25580/14125A points to the heavy kits. The seal number is stamped on the old seal or found by measuring it — 1.719 x 2.565 inches is the 10-19 seal, and heavier hubs use a 2.25 inch inner diameter seal.
Count pieces per axle before ordering. One hub needs one seal, one cotter pin and one washer set; a tandem axle needs four of each. Match the set count to your hub count and add one spare set for the trailer toolbox. Prefer double-lip seals: the second lip keeps water and grit away from the main lip, and a spring behind it holds contact as the seal ages. Replace the seal at every repack even if the old one looks clean.
FAQ
Can I reuse the old seal if it looks undamaged?
No. Pulling a seal bends its shell and nicks the lip, so it will not seat square or seal evenly again.
How do I know which seal size my hub needs?
Read the number stamped on the old seal, or measure the spindle journal and hub bore. A 1.719 inch journal with a 2.565 inch bore takes the 10-19 seal; heavier hubs use a 2.25 inch inner diameter seal.
Should the kit include more than the seal itself?
Yes. Cotter pins must never be reused, tang washers fatigue, and dust caps often bend during removal, so a proper kit bundles all of them.
How often should seals be replaced?
At every bearing repack — once a year or every 12,000 miles for most trailers, and sooner on boat trailers that launch in salt water.
Verdict
A seal kit turns a bearing service from a parts hunt into a single open box. Choose the Lippert kit for a maker-matched single hub, the Lwlusup or WESTERNPRIME boxes for 3,500 lb axles in two-hub or four-hub counts, and the Tgkjmad or Taxutor kits when your hubs run the heavier 25580/14125A bearings. Match the stamped numbers, count your hubs, and keep one spare kit in the trailer.





Write Your Review
No reviews yet. Be the first to share your experience!