⏱ 7 min read  ·  ✅ Updated Nov 2026

A plain hitch pin and clip hold a ball mount in place, but they do nothing to stop a thief. Anyone can pull the clip, slide the pin out, and move your mount, cargo carrier, or bike rack to another vehicle in under a minute. A locking hitch pin closes that gap: the pin still carries the towing load, yet the head cannot come off without a key.

Our top pick: CURT 23518 Barbell Hitch Lock. Runner-up: BOLT 7023584 Receiver Lock for Toyota Keys.

This guide focuses on receiver locking pins, the 1/2 inch and 5/8 inch pins that secure mounts inside 1-1/4, 2, and 2-1/2 inch receiver tubes. A separate guide on this site covers coupler locks, so the picks below stay on the receiver side, where most quick thefts happen.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

For most 2 inch receivers, the CURT 23518 barbell lock is the simple, sturdy default. Toyota owners should look at the BOLT 7023584, which codes itself to the truck ignition key. Trucks with heavy-duty tow packages fit the extended Master Lock 1469DAT. The METOWARE stainless pin adds anti-rattle rings for quiet towing, and the CZC AUTO keyed-alike two-pack covers two vehicles with one key.

CURT 23518 Barbell Hitch Lock

The CURT 23518 is the classic barbell design: a 5/8 inch steel pin with a locking head on one end and a fixed ball on the other, so the head shape itself signals that the mount is secured. It fits standard 2 inch receiver tubes and gives 2.85 inches of usable pin length, suiting most ball mounts, cargo carriers, and bike racks.

Locking takes a quarter turn of the key, and the pin can stay in place while you tow. A watertight dust cap covers the keyway, keeping road grit and slush out of the cylinder. CURT notes this pin does not suit double-walled receiver tubes on some heavy-duty trucks, so measure first if your truck has a reinforced collar.

Specs

  • Pin diameter: 5/8 inch
  • Fits: 2 inch receiver tubes, Class III and IV
  • Usable pin length: 2.85 inches
  • Lock style: barbell head, quarter-turn key
  • Keyway cover: watertight dust cap
  • Keys included: 2

BOLT 7023584 Receiver Lock for Toyota Keys

The BOLT 7023584 removes the extra key from your ring entirely. Insert your Toyota ignition key, turn it once, and the lock codes itself to that key permanently. The same key that runs the truck then opens the receiver lock, a real convenience at dark boat ramps.

Inside, an automotive-grade cylinder uses a six-plate tumbler sidebar that resists picking and bumping better than basic pin cylinders. A stainless shutter guards the keyway, and the auto-return spring snaps the lock shut when the key comes out, so it cannot be left half-latched by mistake.

This 5/8 inch version fits 2 and 2-1/2 inch receivers on Class III, IV, and V hitches. Because the lock learns one key pattern, confirm your Toyota key type matches before buying; BOLT sells matched versions for other truck brands under different part numbers.

Specs

  • Pin diameter: 5/8 inch
  • Fits: 2 and 2-1/2 inch receivers, Class III, IV and V
  • Key system: learns your Toyota ignition key
  • Cylinder: automotive grade, six-plate tumbler sidebar
  • Keyway guard: stainless steel shutter
  • Locking action: auto-return spring, locks when key is removed

Master Lock 1469DAT Stainless Steel Barbell Receiver Lock

Some factory heavy-duty tow packages use longer receiver tubes, and a standard pin can come up short. The Master Lock 1469DAT answers with an extended 5/8 inch stainless pin giving 3-1/2 inches of usable length, sized for the Toyota Tundra, Ford F-150, F-250 and F-350, and GM and Dodge 2500 and 3500 trucks with heavy-duty tow packages.

The barbell head uses a push-to-lock action: press the lock body firmly onto the pin until it seats, then remove the key. The swivel head turns freely, which helps when lining up the keyway on uneven ground. Stainless construction shrugs off road salt, and the Weather Tough seal plus watertight cap shield the mechanism from moisture and dirt.

Specs

  • Pin diameter: 5/8 inch, extended length
  • Usable pin length: 3-1/2 inches
  • Fits: 2 and 2-1/2 inch receivers on heavy-duty tow packages
  • Material: stainless steel barbell pin
  • Locking action: push to lock, swivel head
  • Load capacity: 10,000 pounds, Class III and IV

METOWARE Trailer Hitch Lock Pin

The METOWARE lock pairs a 5/8 inch stainless steel pin with rubber O-rings that take up the slack between pin and receiver wall. That small detail kills the metallic clunk many locking pins make over bumps, and keeps the pin from fretting against the tube on long drives.

The pin is 3-1/2 inches long and fits both 2 and 2-1/2 inch receivers on Class III and IV hitches. The lock head uses a tubular barrel key, a style that resists casual picking, and an all-weather cap seals the keyhole against water and dust. Two keys are included: one for the truck key ring, one spare for the glove box.

Specs

  • Pin diameter: 5/8 inch
  • Pin length: 3-1/2 inches
  • Fits: 2 and 2-1/2 inch receivers, Class III and IV
  • Material: stainless steel
  • Key style: tubular barrel key, 2 keys included
  • Extras: anti-rattle O-rings, all-weather keyway cap

CZC AUTO Hitch Receiver Pin Lock, Keyed Alike 2-Pack

Households with two tow vehicles benefit most from this CZC AUTO pair. The box holds two 5/8 inch locking pins keyed alike, so a single key opens both receivers.

Each pin is carbon steel with a painted black finish and a bent, right-angle head that gives gloved hands good leverage. The pins fit 2 and 2-1/2 inch receivers on Class III and IV hitches and work with ball mounts, bike racks, and cargo trays. A rubber cap covers the key slot, and the lock head rotates a full 360 degrees, which helps when the receiver is tucked close to the bumper.

Specs

  • Pin diameter: 5/8 inch
  • Pack contents: 2 locking pins, keyed alike
  • Fits: 2 and 2-1/2 inch receivers, Class III and IV
  • Material: carbon steel, painted finish
  • Lock head: bent right-angle, 360 degree swivel
  • Keyway cover: rubber cap

How to choose

Begin with pin diameter. Receivers with 1/2 inch pin holes serve Class I and II hitches on smaller cars, while 5/8 inch pins serve Class III, IV, and V hitches on trucks and larger SUVs. Match the diameter to your receiver.

Next, measure usable pin length across your receiver tube. Standard 2 inch tubes need roughly 2-3/4 to 3 inches of span, while 2-1/2 inch tubes and heavy-duty tow packages need 3-1/2 inches or more. Extended pins like the Master Lock above exist for that case.

Pick a key system that fits your habits. Barrel keys are compact and resist picking, flat keys are easy to duplicate, and ignition-key locks like the BOLT remove the spare key question altogether. If two vehicles tow in your household, a keyed-alike pair saves fumbling at the ramp.

Weather protection decides how long a lock stays smooth. Look for a sealed cap over the keyway and stainless or well-coated steel if your truck sees road salt or a boat ramp. Finally, remember what the lock protects: a locking pin secures the mount inside the receiver, not the coupler on the ball, so pair it with a coupler lock when the trailer sits unhitched.

FAQ

Will a 5/8 inch locking pin fit my 2-1/2 inch receiver?
Yes, if the usable pin length is long enough. Most 2-1/2 inch receivers still use a 5/8 inch pin hole, but the wider tube needs a pin with about 3-1/2 inches of span, like the extended picks here.

Can I tow with a locking pin in place?
Yes. A receiver lock replaces the standard pin and clip and carries towing loads for its hitch class while locked. Check that the lock head is fully seated before driving.

What happens if I lose the keys?
Keep the spare key separate from the truck, and note the key code if your lock provides one. Without a key or code, a hardened pin usually has to be cut off, which is the point of the design.

Do locking pins stop rattle?
A plain locking pin can clunk like a standard pin. Models with rubber O-rings take up the slack for a quieter ride.

Verdict

A receiver lock is a small part that protects everything plugged into your hitch. Choose the CURT 23518 for a straightforward 2 inch setup, the BOLT 7023584 if you want your Toyota ignition key to do double duty, and the Master Lock 1469DAT when a heavy-duty tow package demands an extended pin. The METOWARE suits full-time towing, and the CZC AUTO keyed-alike pair is the smart buy for two-vehicle households. Match diameter and span to your receiver, keep the keyway capped, and your mount stays yours.

Explore Our Guides & Free Tools